sube101 Posted April 19, 2013 Share Posted April 19, 2013 (edited) im offering single port unequal length headers for EJ 2.2 motors. in both stainless and aluminized steel. tig welded with mandrel bends. everything is made in house, flanges are water jet cut, it will bolt to factory subaru exhaust. i am located in st helens oregon 97051 store pick ups are welcome to order you may call 503 750 nine eight 4 two or email sube4x4@gmail.com my current website is www.infernofab.com the current prices are Stainless Steel: 260.00 + 40.00 for shipping. aluminized are 200.00 + 40.00 for shipping pricing may change afer i get my webstore online. i will be offering flanges mandrel bends and collectors as well as straight tube. Edited April 22, 2013 by sube101 3 Link to comment Share on other sites More sharing options...
bratty82 Posted April 19, 2013 Share Posted April 19, 2013 Hello, what motor are you making the header for? I have an 82 brat with a fresh 1.8 . EA81 Thanks. Link to comment Share on other sites More sharing options...
sube101 Posted April 19, 2013 Author Share Posted April 19, 2013 i apologize its for for an EJ 2.2 Link to comment Share on other sites More sharing options...
SubieTrav Posted April 22, 2013 Share Posted April 22, 2013 Will these increase gas mileage and power. If so any idea how much. Link to comment Share on other sites More sharing options...
sube101 Posted April 22, 2013 Author Share Posted April 22, 2013 i honestly am unsure on the gains or if there is an improvement in fuel efficiency. Link to comment Share on other sites More sharing options...
86BRATMAN Posted April 23, 2013 Share Posted April 23, 2013 I don't know if its been asked before, but do you have any plans/ interest in building a test pipe to eliminat the second cat on the late 90's ej cars? Link to comment Share on other sites More sharing options...
sube101 Posted April 23, 2013 Author Share Posted April 23, 2013 I don't know if its been asked before, but do you have any plans/ interest in building a test pipe to eliminat the second cat on the late 90's ej cars? i do have the jigs done for producing those pipes. they are 2.25 O.D. for aluminized it'll cost 104.60 and the stainless will cost 118.46 + shipping. i will build a set of them for pictures later this afternoon and try to get pictures up tomorrow. Link to comment Share on other sites More sharing options...
86BRATMAN Posted April 23, 2013 Share Posted April 23, 2013 count me in for one in a few weeks, I need to get some tires for the legacy first and foremost Link to comment Share on other sites More sharing options...
NorthCoast Posted May 1, 2013 Share Posted May 1, 2013 i do have the jigs done for producing those pipes. they are 2.25 O.D. for aluminized it'll cost 104.60 and the stainless will cost 118.46 + shipping. i will build a set of them for pictures later this afternoon and try to get pictures up tomorrow. Pics? Also, looking for a track pipe (i.e. cat delete) for my 97 Imp. Link to comment Share on other sites More sharing options...
sube101 Posted May 1, 2013 Author Share Posted May 1, 2013 ok here is the pic of the test pipe unwelded and here is also a pic of a new product. MAF adapter made with aluminum Link to comment Share on other sites More sharing options...
sube101 Posted May 1, 2013 Author Share Posted May 1, 2013 the MAF adapters are 45.00 plus shipping. they are made from half inch 6061 t6 aluminum 3" O.D. tube with a bead role on the end. will also be up on Ebay soon. thanks Link to comment Share on other sites More sharing options...
Battlewagon203 Posted May 5, 2013 Share Posted May 5, 2013 Are the aluminized headers still available? Link to comment Share on other sites More sharing options...
sube101 Posted May 5, 2013 Author Share Posted May 5, 2013 all headers are always available. i build them all as soon as they are ordered Link to comment Share on other sites More sharing options...
Battlewagon203 Posted May 5, 2013 Share Posted May 5, 2013 Awesome thanks Link to comment Share on other sites More sharing options...
kanurys Posted May 21, 2013 Share Posted May 21, 2013 Cool Product. It's very tempting for my 99 Phase II EJ22 (single port) Link to comment Share on other sites More sharing options...
barracuda423 Posted November 9, 2013 Share Posted November 9, 2013 could you make one for a ea series engine or are you just sticking to the ej's? Link to comment Share on other sites More sharing options...
sube101 Posted November 15, 2013 Author Share Posted November 15, 2013 i will be prototyping them here in the near future. but i have the turbo headers to prototype before i can get to the ea series Link to comment Share on other sites More sharing options...
wentz912 Posted November 20, 2013 Share Posted November 20, 2013 Would it be too outrageous to ask for a turbo, single port header? I'm gathering parts to turbo my NA EJ22. Can you handle it? Link to comment Share on other sites More sharing options...
sube101 Posted November 20, 2013 Author Share Posted November 20, 2013 a turbo header would be no problem, however i would need your car and it would be a custom job rather then a normal sale. email me for further information. sube4x4@gmail.com thanks Link to comment Share on other sites More sharing options...
bratman18 Posted December 19, 2013 Share Posted December 19, 2013 Just got one of these from Steven last week. Can't wait to get my EJ swap done so I can install it. Just have to say that he does amazing work, and is great to deal with. He definitely cares about his customers, and is willing to work with you. Thanks again Steve! Link to comment Share on other sites More sharing options...
sube101 Posted December 20, 2013 Author Share Posted December 20, 2013 thank you! and i hope you enjoy it. 1 Link to comment Share on other sites More sharing options...
NWSubie Posted December 30, 2013 Share Posted December 30, 2013 I have one of these headers on my 98 OBS was easy to install and was a great upgrade to replace my stock header that had developed small pin holes in it due to rust. Anyone wanting a great well made product its definitely worth buying! Thanks Steve. Link to comment Share on other sites More sharing options...
sube101 Posted December 30, 2013 Author Share Posted December 30, 2013 glad you like it. enjoy Link to comment Share on other sites More sharing options...
sube101 Posted January 13, 2014 Author Share Posted January 13, 2014 hello everyone, unfortunately i am no longer able to make the aluminized version of the headers, the place i get my mandrel bends are out of stock and are no longer wanting to bend that material. so instead i offer mild steel in its place. Link to comment Share on other sites More sharing options...
KRM91 Posted January 19, 2014 Share Posted January 19, 2014 Need one for my ea82 before the old one just falls off. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now