Godsmulligan Posted April 29, 2013 Share Posted April 29, 2013 I've always wanted a brat and when I saw this one for a couple hundred bucks I couldn't pass it up. As you may know I'm fixing the tail gate right now. Next is a satin black paint job. I have plans to out some tube bumpers on it a roll bar and a winch with an overhaul on the interior thrown in. I've already gave it a tune up, a new battery, replaced the rear wheel bearing, sealed the fun top, a new radiator sensor, rebuilt the brakes and fixed the throttle cable. It's going to be used for light off-road use like, hunting, camping, gold panning and driving cross country in the winter. So, it has to be dependable. 2 Link to comment Share on other sites More sharing options...
Reza Posted April 29, 2013 Share Posted April 29, 2013 Really like the satin black Link to comment Share on other sites More sharing options...
Godsmulligan Posted April 30, 2013 Author Share Posted April 30, 2013 I hope the black satin looks good. Link to comment Share on other sites More sharing options...
Demon Brat Posted April 30, 2013 Share Posted April 30, 2013 My son and I too are painting his 79 flat black. Eastwood.com just introduced a new Dead Rat Flat Black. It is flatter than satin. I think we might go with this color. http://www.eastwood.com/eastwoods-dead-rat-flat-black-ssu-kits.html Just a thought. Link to comment Share on other sites More sharing options...
Godsmulligan Posted May 1, 2013 Author Share Posted May 1, 2013 My son and I too are painting his 79 flat black. Eastwood.com just introduced a new Dead Rat Flat Black. It is flatter than satin. I think we might go with this color. http://www.eastwood.com/eastwoods-dead-rat-flat-black-ssu-kits.html Just a thought. Good call. That is exactly what I was picturing. Unfortunately for this endeavor, I'm going to be trying my first ever rattle can paint job. I've done actual paint jobs on cars, just never a rattle can one. I need something I can cover it with, go back and work on a section, then spray the section. This car has lots of work that needs to be done, and I want to still use it while I'm working on it. I'm hoping the satin will help hide the fact that it's rattle can without looking like a primer. Not to mention the satin kind of matches the faded paint. Fingers crossed Link to comment Share on other sites More sharing options...
Reza Posted May 1, 2013 Share Posted May 1, 2013 maybe you should just wait on the paint job? Link to comment Share on other sites More sharing options...
Godsmulligan Posted May 1, 2013 Author Share Posted May 1, 2013 Think of this paint job as a band-aid. I need something to paint it while I'm working on it and I don't want to be driving around with splotches of primer on it for the next few years while worrying that I'm going to get pulled over for being a meth head. Their shouldn't be any problems with using rattle can? I can still repaint it later, right? The rattle can, most likely, won't cause a reaction with the new paint, if I primer over top of it, right... right? Stop freaking me out, people. Link to comment Share on other sites More sharing options...
belacane Posted May 2, 2013 Share Posted May 2, 2013 (edited) Think of this paint job as a band-aid. I need something to paint it while I'm working on it and I don't want to be driving around with splotches of primer on it for the next few years while worrying that I'm going to get pulled over for being a meth head. Their shouldn't be any problems with using rattle can? I can still repaint it later, right? The rattle can, most likely, won't cause a reaction with the new paint, if I primer over top of it, right... right? Stop freaking me out, people. I have been doing the same thing with my brat; spot painting to abate rust until I can afford to do a really good full out paint job. I used a rattle can. Just make sure that you do at least 2-3 solid coats, and a clear coat (also rattle can) helped too. It's not perfect by any means, but it works temporarily. If I plan on sanding off old paint before doing the new paint job, I don't see how rattle can paint will affect new paint. It hasn't had any effects on the old paint either except for a slight color mismatch, which doesn't bother me right now. Edited May 2, 2013 by belacane Link to comment Share on other sites More sharing options...
Godsmulligan Posted May 3, 2013 Author Share Posted May 3, 2013 Thanks, I should finish painting my tailgate today, then I'll have a better idea how this rattle can thing is going to work. It can't be any worse than it looks now. Link to comment Share on other sites More sharing options...
86BRATMAN Posted May 3, 2013 Share Posted May 3, 2013 I've done quite a few rattle can band aid jobs, if I could make a recomendation on the paint use the krylon rust tough line. The nozzle on the can fans the paint out in a similar spray pattern to an actual gun and it is so much easier to make a beter looking job with it. Link to comment Share on other sites More sharing options...
Godsmulligan Posted May 3, 2013 Author Share Posted May 3, 2013 I'm using Krylon right now for that very reason. Link to comment Share on other sites More sharing options...
Godsmulligan Posted May 5, 2013 Author Share Posted May 5, 2013 (edited) Here is the tailgate that I painted with Krylon. It still needs to be buffed and it has some dusty hand prints that could be washed off. Still looks a 1000x better than it did, and no that is not a dent. Rattle can baby! Edited May 5, 2013 by Godsmulligan Link to comment Share on other sites More sharing options...
Reza Posted May 5, 2013 Share Posted May 5, 2013 Looks good man, belay my last. Link to comment Share on other sites More sharing options...
Godsmulligan Posted May 5, 2013 Author Share Posted May 5, 2013 so far, so good, anyway. thanks Link to comment Share on other sites More sharing options...
Godsmulligan Posted May 17, 2013 Author Share Posted May 17, 2013 picked up some parts today. I've been keeping all the receipts in the glove box. The stack is getting pretty thick. Been doing some painting. pics to come soon... Link to comment Share on other sites More sharing options...
baccaruda Posted May 17, 2013 Share Posted May 17, 2013 Title changed per request... Wow, not bad for a couple hundo! Good luck with the project. Link to comment Share on other sites More sharing options...
Turbone Posted May 17, 2013 Share Posted May 17, 2013 Dont rattlecan it, go plastidip. It can be peeled off later and then painted correctly with the color you want. https://www.dipyourcar.com/ Link to comment Share on other sites More sharing options...
Godsmulligan Posted May 17, 2013 Author Share Posted May 17, 2013 (edited) too late, already started and everything is getting rattle caned, including interior (VHT vinyl and Plasticote) . just finished the wheels today. Plus I have a lot of body work to do and Plastidip doesn't sand very well. Thanks for the title change Baccaruda Edited May 17, 2013 by Godsmulligan Link to comment Share on other sites More sharing options...
Godsmulligan Posted May 17, 2013 Author Share Posted May 17, 2013 The rims are back on. Gloss black with anodized red. They look odd in comparison to the rest of the car, but eventually all the chrome is getting anodized red and of course the satin black. Painted the hood last week. I think I'm gonna start on the inside this week. Everything goes satin black with red highlights. kind of a twist on the 80's red and black. Almost had this thread changed to "Brat out of Hell" Link to comment Share on other sites More sharing options...
Reza Posted May 19, 2013 Share Posted May 19, 2013 Or "Bratmobile" 1 Link to comment Share on other sites More sharing options...
Godsmulligan Posted May 23, 2013 Author Share Posted May 23, 2013 The rain mocks me. Link to comment Share on other sites More sharing options...
Godsmulligan Posted June 4, 2013 Author Share Posted June 4, 2013 Just broke my windshield trying to get it out. I'm done for the day Link to comment Share on other sites More sharing options...
Godsmulligan Posted June 4, 2013 Author Share Posted June 4, 2013 Cooled down, went back out and decided to bust the window out. placed both feet on the windshield and pushed. It popped out, easy as pie. pissed me off but it made sense. Use the most surface area you can to push the window out. Still pissed Link to comment Share on other sites More sharing options...
bendecker Posted June 4, 2013 Share Posted June 4, 2013 I know you know this, but that SUCKS!!! I feel your pain : ( Link to comment Share on other sites More sharing options...
Godsmulligan Posted June 5, 2013 Author Share Posted June 5, 2013 thanks Bendecker finished stripping the inside today, think I'm gonna upgrade the dash lights while it's out http://www.ultimatesubaru.org/forum/topic/69467-ea82-dashboard-backlights-upgrade-to-hid-white-led%C2%B4s/ also going to replace the heater core and fan brushes while I've got the dash out. Better now than later Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now