mightGETaSUBARU Posted May 17, 2013 Share Posted May 17, 2013 Well the O2 sensor wires pulled out of the plug... any idea what order they go in? Link to comment Share on other sites More sharing options...
mightGETaSUBARU Posted May 17, 2013 Author Share Posted May 17, 2013 Link to comment Share on other sites More sharing options...
Rooster2 Posted May 17, 2013 Share Posted May 17, 2013 Is this from the front or rear O2 sensor? I just replaced my rear sensor that is a three wire unit. The sensor wiring and connector wiring are color coded the same. So, the colored wires matched up the same upon pushing the connector together from the sensor pig tail to the car wire harness (receiving) connector. Link to comment Share on other sites More sharing options...
ocei77 Posted May 17, 2013 Share Posted May 17, 2013 (edited) Which engine and what year? O. Edited May 17, 2013 by ocei77 Link to comment Share on other sites More sharing options...
mightGETaSUBARU Posted May 18, 2013 Author Share Posted May 18, 2013 98 Legacy outback 2.5 DOHC, front o2 sensor Link to comment Share on other sites More sharing options...
ocei77 Posted May 18, 2013 Share Posted May 18, 2013 (edited) This is from a 96. Seems to be the same.. As shown with locking clip on top, Left is yellow with a red stripe, right is white and the bottom is black. O. Edited May 18, 2013 by ocei77 Link to comment Share on other sites More sharing options...
mightGETaSUBARU Posted May 18, 2013 Author Share Posted May 18, 2013 101_15461.JPG101_15461.JPGThis is from a 96. Seems to be the same.. As shown with locking clip on top, Left is yellow with a red stripe, right is white and the bottom is black. O.you it looks correct, the part numbers for the upstream o2 sensor are the same on both years Thank Link to comment Share on other sites More sharing options...
mightGETaSUBARU Posted May 21, 2013 Author Share Posted May 21, 2013 weird mine are White, White and black Link to comment Share on other sites More sharing options...
ocei77 Posted May 21, 2013 Share Posted May 21, 2013 Not a big deal. Sometimes they change wire colors between years. As long as the left wire on top is the white one, all else follows in sequence. O. Link to comment Share on other sites More sharing options...
mightGETaSUBARU Posted May 21, 2013 Author Share Posted May 21, 2013 Not a big deal. Sometimes they change wire colors between years. As long as the left wire on top is the white one, all else follows in sequence. O. please explain in picture... my brain needs pictures Link to comment Share on other sites More sharing options...
ocei77 Posted May 22, 2013 Share Posted May 22, 2013 I "assumed" the harness side pulled out. I will have to pull it in the morning and see what goes to where on the sensor side. O. Link to comment Share on other sites More sharing options...
ocei77 Posted May 22, 2013 Share Posted May 22, 2013 (edited) if the plug side pulled, the white wires go to the top two pins. Black to bottom. They should still be in the correct orientation. O. Edited May 22, 2013 by ocei77 Link to comment Share on other sites More sharing options...
mightGETaSUBARU Posted May 22, 2013 Author Share Posted May 22, 2013 So it does not matter what order the whites go in, so long as the black is in position 3? Ok thank you Link to comment Share on other sites More sharing options...
ocei77 Posted May 22, 2013 Share Posted May 22, 2013 (edited) One white goes to ground and the other goes to pin 38 on ecu., when mated. I can't say it's gospel, but I don't think it will matter which goes where, since there are no other circuits in between or connecting, except ground. For future ref:http://www.main.experiencetherave.com/subaru_manual_scans/ and http://opposedforces.com/parts/legacy/ O. Edited May 22, 2013 by ocei77 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now