naldo Posted May 18, 2013 Share Posted May 18, 2013 hello people, i just put a new motor on my forester 2.5x and when i started the car it starts right up but for some reason my RPM are falling under 1K I think they stay around 500 My engine light is on and its says that i have a bad MAF sensor another problem that i encounter was that my EGR valve is making a Scratching noise I don't why ? Can my MAF sensor and EGR valve be causing my car to have Low RPM keep in mind if i drive the car it drives like a champ but when I am in parking or at a light my RPM will fall under 1K and sometimes it will shut off on me Any ideas?? Link to comment Share on other sites More sharing options...
Gloyale Posted May 18, 2013 Share Posted May 18, 2013 Idling under 1k is normal. 700-800 is about right Stalling/dieing is not normal. If you've got a code for bad Maf I'd change that tout first and the figure it out from there. 1 Link to comment Share on other sites More sharing options...
naldo Posted May 18, 2013 Author Share Posted May 18, 2013 okay i clean it alittle bit and the EGR valve is working alright again it looks like that my Injector are taking in air because when i spray them with carbulator cleaner and the car started to idle and then it stop I did put some universal O-rings on the injectors because they were leaking fuel i Think i have to buy the original O-rings and see if it stops Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now