BratRod Posted June 29, 2013 Share Posted June 29, 2013 Im about to register the Brat again, and want to have the front end in top condition. I've done everything except Sway-bar bushings, and control arm bushings. The control arm bushings were easy to find, but the sway bar bushings... not so much. On RockAuto they're not listed for an 84 Brat, so I did 84 GL and: RAYBESTOS Part # 5501026 IIRC there are 4 bushings and two different sizes, correct? Thanks for the help in advance guys. Link to comment Share on other sites More sharing options...
the sucker king Posted June 29, 2013 Share Posted June 29, 2013 correct on four bushing, two of each style. Link to comment Share on other sites More sharing options...
the sucker king Posted June 30, 2013 Share Posted June 30, 2013 (edited) just looked at RAYBESTOS Part # 5501026, they are the rear ones that mount to what I refer to as "tranny mounting plate". thats the red part in this pic Edited June 30, 2013 by the sucker king 1 Link to comment Share on other sites More sharing options...
the sucker king Posted June 30, 2013 Share Posted June 30, 2013 This is the one you are looking at. Note this: you can see above the bushing that the mounting surface has a notch. This is sometimes flat, depending I think on the year of the car. there are bushings that have the notch part on them. Since i can't find them, I have the flat ones in use, no problems. This is what the front bushings look like : 1 Link to comment Share on other sites More sharing options...
BratRod Posted June 30, 2013 Author Share Posted June 30, 2013 Thanks a bunch. Do you have a link to the front ones? Link to comment Share on other sites More sharing options...
NickNakorn Posted June 30, 2013 Share Posted June 30, 2013 Cheaper to make them here in UK (UK prices are just silly expensive - not that they're at all easy to get). See http://www.ultimatesubaru.org/forum/topic/136620-making-a-polyurethene-bush-or-bushing/ Link to comment Share on other sites More sharing options...
BratRod Posted June 30, 2013 Author Share Posted June 30, 2013 Cheaper to make them here in UK (UK prices are just silly expensive - not that they're at all easy to get). See http://www.ultimatesubaru.org/forum/topic/136620-making-a-polyurethene-bush-or-bushing/ I have reviewed your thread a few times, and have contemplated doing as you have. The dilemma is that they aren't in good enough condition to cast a mold with. Link to comment Share on other sites More sharing options...
NickNakorn Posted June 30, 2013 Share Posted June 30, 2013 Yes, when they are a compound shape, it helps to have an original capable of being used as a plug. But for simple shapes (like cylinders or even 'top hats') you can pour into cardboard shapes or make a clay plug. Link to comment Share on other sites More sharing options...
BratRod Posted July 2, 2013 Author Share Posted July 2, 2013 Bump. Still need to know what the others are. Link to comment Share on other sites More sharing options...
the sucker king Posted July 2, 2013 Share Posted July 2, 2013 heres better pics of what you are looking for- the ones on the top in the pic of 4. I have never been able to find new ones of these. I know this seems a bit obyious, but did you call a dealership? I have been surprised more than once by these little old parts they still can get. Other than that, I grab them at the junkyards from time to time so I always have a spare set. ggod luck Link to comment Share on other sites More sharing options...
BratRod Posted July 2, 2013 Author Share Posted July 2, 2013 Ok, thanks again. I guess I should call the dealership. I usually don't, but I'll give it a shot. We don't see Subarus in yards that often down here. Link to comment Share on other sites More sharing options...
the sucker king Posted July 2, 2013 Share Posted July 2, 2013 If the dealer doesn't have I could probably grab you a set next time I go to the jy, maybe this upcoming weekend . if you are in no hurry. also try posting in the want ads here. I d sell you my spare set, but dunno if I can replace them with good ones. Link to comment Share on other sites More sharing options...
BratRod Posted July 2, 2013 Author Share Posted July 2, 2013 Yeah, I'd much rather you get my money. You have been good to me in the past, let me know. Thanks again John. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now