AMCDawes Posted April 20, 2004 Share Posted April 20, 2004 Random question: On my way back from the shop (see previous posts: misfire 1 & 3), I was driving behind my wife who was in our 98 Outback. This turns out to be the first time I was ever behind the car while the brakes first come on. The brake light blinks a few times (6-7) and then stays on solid. Just wondering if this is the standard behavior for these vehicles... I think I would have noticed if I saw one on the road doing this... but I never know. Maybe an aftermarket "safety accessory"? Just a quick poll :-) Thanks all, -A Link to comment Share on other sites More sharing options...
drquasievil Posted April 20, 2004 Share Posted April 20, 2004 Mos code for stay back fool Link to comment Share on other sites More sharing options...
Commuter Posted April 20, 2004 Share Posted April 20, 2004 Not standard behaviour from anything I have heard. However, I just added exactly this feature to my 97 OB. It's a little electronic device that causes the lights to blink a few times. It even has some smarts to it. It takes about 30 seconds to fully reset. If you reapply the brakes within less time than that, it blinks less. The idea is to not drive the person nuts behind you if in stop and go traffic. Apparently these systems are popular with (for come from?) the motorcycle industry. I wired mine in to just act on the center high mount brake light only. One has to have "some" toys Commuter Link to comment Share on other sites More sharing options...
howards11 Posted April 20, 2004 Share Posted April 20, 2004 COMMUTER: Can you post information about the device you installed ? Where did you purchase it ? Can you provide a link? Thanks ! ~Howard Not standard behaviour from anything I have heard. However, I just added exactly this feature to my 97 OB. It's a little electronic device that causes the lights to blink a few times. It even has some smarts to it. It takes about 30 seconds to fully reset. If you reapply the brakes within less time than that, it blinks less. The idea is to not drive the person nuts behind you if in stop and go traffic. Apparently these systems are popular with (for come from?) the motorcycle industry. I wired mine in to just act on the center high mount brake light only. One has to have "some" toys Commuter Link to comment Share on other sites More sharing options...
AMCDawes Posted April 20, 2004 Author Share Posted April 20, 2004 Good to know. I've seen these things on motorcycles... but then again I know a lot of tweakheads that wire all sorts of crazy stuff onto their bikes. One of the other students here had his headlight flicker with the timing so it looked "old-timey." Mine resets quickly so it has the added feature of annoying other drivers. I'll poke through things more closely... I haven't cross-checked the relay part numbers or anything, my guess is it will become obvious once I look closer. -Andy Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now