O.C.D. Posted August 12, 2013 Share Posted August 12, 2013 So the Brat is almost road-going and I am dying to get her out. I am currently only stumped by two things. One being the carb, which I have asked about in the 80's forum and the other being the clutch. New clutch disc, pilot, throwout, pressure plate and throwout return springs. Everything is back together and there is no clutch engagement at all? The pedal goes all the way to the floor with nothing? I checked the fork and it is not loose or of the pivot. The return springs are working as it pulls the bearing back out. I can even move the fork on my own and there is resistance. So what am I missing? There is a ton of slack and the adjuster is almost all of the way out. I do have a new clutch cable but have not put that in yet. What am I missing? Thanks. Jon Link to comment Share on other sites More sharing options...
espey_16 Posted August 12, 2013 Share Posted August 12, 2013 Did you put the disk in backwards by chance? I did that once and had the same symptoms you're having. Link to comment Share on other sites More sharing options...
O.C.D. Posted August 12, 2013 Author Share Posted August 12, 2013 (edited) Here it is installed. I hope to you know what I didn't do that. But I recall making it fit like the one I removed. Am I wrong? Edited August 12, 2013 by O.C.D. Link to comment Share on other sites More sharing options...
O.C.D. Posted August 13, 2013 Author Share Posted August 13, 2013 Can anyone tell me if the fingers (position) is indicative of a clutch disk in backwards? Link to comment Share on other sites More sharing options...
ivans imports Posted August 13, 2013 Share Posted August 13, 2013 looks right change cabble check that the fork is seated to the ball pivot sounds like streched cabble addjust it to about 1/8 inch play. If the disk was backwards the plate whould not look like it does also did you change the small pilot berring I find is very hard to install without damaging it did the transs go on nicely ? or was it a fight Link to comment Share on other sites More sharing options...
O.C.D. Posted August 14, 2013 Author Share Posted August 14, 2013 YESSSSSS!!!!!!!!!!!!!!!!!!!! Thanks for confirming Ivan!!!!! Pilot was replaced and the trans slid right into the crankshaft/pilot with little to no effort. I will check the pivot and just install the new clutch cable I have. Link to comment Share on other sites More sharing options...
ivans imports Posted August 14, 2013 Share Posted August 14, 2013 1/8 - 1/4 free play under the addjuster nut to fork and in 1rst gear with clutch in car should not try to move at all if trying to creap ahead needs more peadal should disangae about 1/2 way up Link to comment Share on other sites More sharing options...
O.C.D. Posted August 15, 2013 Author Share Posted August 15, 2013 I will report back with my findings and thanks again for the info. I really hope that the cable is the issue and it was stretched. Still seems odd that I get no engagement at all though? Oh well, won't know til I swap cables. Link to comment Share on other sites More sharing options...
O.C.D. Posted August 19, 2013 Author Share Posted August 19, 2013 Cables swapped and she shifts flawlessly! I can't believe it was stretched that far. Who knows. At least she can be driven now. Did a small burnout last night on accident as I was not used to the clutch working so well, lol. Link to comment Share on other sites More sharing options...
ivans imports Posted August 19, 2013 Share Posted August 19, 2013 sweet !! Link to comment Share on other sites More sharing options...
bertmann73 Posted August 19, 2013 Share Posted August 19, 2013 engine looks good by the way... nice job. PS the coors light can beside it remids me of a few mechanical blunders ive commited.... Link to comment Share on other sites More sharing options...
O.C.D. Posted August 21, 2013 Author Share Posted August 21, 2013 engine looks good by the way... nice job. PS the coors light can beside it remids me of a few mechanical blunders ive commited.... I would say a few beers have been harmed during this build, lol. Garage time is my sanity time - no wife or kid. Just me, a project, tools, music and beer for a few hours a week. Used to be a lot more but what can ya do. Link to comment Share on other sites More sharing options...
moosens Posted August 22, 2013 Share Posted August 22, 2013 check your pedal box for a crack up the left side? 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now