Jump to content
Ultimate Subaru Message Board

Black Box. Ea81 Firewall


Recommended Posts

So I picked up this 86 hatchback a couple weeks ago, got it running & have been tinkering with it. Anyways, it has this black box mounted on the passenger side fire wall. I believe the red wire went to the + on the battery. The rest was soldered together, the blue wire from the box to a red wire on a toggle switch & a thick black wire that ended up going to nothing .... Anyone have any clue as to what this could be for ? A relay ? Alarm ? It has no lettering or anything on it so I can't look it up online, I just took it out of my car as its obviously not for anything ....

 

null_zps44dd3d91.jpg

null_zps48069fdc.jpg

 

null_zps497de8fe.jpg

Pulled out the black wire to find it not connected to anything

null_zps567b95b6.jpg

I also have this yellow wire that spliced under neath my carpet in the back, right along the tranny tunnel

null_zpse8674eee.jpg

 

Car is an ea81 '86 hatch back

Link to comment
Share on other sites

They soldered it to shielded coax!? Huh? Well, unless it grounded through the housing, not enough wires for a relay but it still could be. Maybe the had the fuel pump jury-rigged at some point. The other thing that comes to mind is an RF suppressor/filter. Why they would tap a power feed off of it to a switch is a bit perplexing unless they had an older FM modulated CD changer in the car. The switch would have had filtered B+ to turn on the modulator which in turn turns on the changer. The coax would have been the power back to the changer and maybe their thought was using the shielded coax would reduce any RF after the filter. Good idea, but poorly applied as soldering to the shielding in the coax renders it useless. The shielding should have been grounded to the chassis to bleed off the RF. I'm leaning towards this idea as the box looks similar to the older, generic RF filters. For those who are not quite sure what I'm referring to.... Ever install audio equiptment in a car and get that annoying 'audio tachometer' (whine) from the speakers? That is RF (radio frequency) intereference. It bleeds through the power wires to the stereo from either the alt or coil. The RF filter 'cleans' the power signal up so you don't get the whine.

Link to comment
Share on other sites

It could be but I have never seen one like that.. I have a  few in the garage.  I responded in his build thread. It kinda looks like a valet box for some type of alarm system.  All I can do is speculate without tracing the wires back to the respective ends.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...