espey_16 Posted August 18, 2013 Share Posted August 18, 2013 I don't know how, but my crank pulley came off and the bolt is gone with the wind. I'm at the jy now but they don't have any ea82s here. Will one from an ej22 work? If not does anyone know what size and thread so I can go to the bolt store and buy one? Link to comment Share on other sites More sharing options...
Gloyale Posted August 18, 2013 Share Posted August 18, 2013 EJ bolt is too long. Though you could cut one down. Think it's m14x1.25......not sure though. Definately needs to be very high grade whatever size it is. Link to comment Share on other sites More sharing options...
espey_16 Posted August 18, 2013 Author Share Posted August 18, 2013 Its the same thread though? How much do you think I'd have to cut off? Or could I just space it out with washers temporarily? Link to comment Share on other sites More sharing options...
NorthWet Posted August 18, 2013 Share Posted August 18, 2013 Cut my be difficult. Temporarily spacing would probably be acceptable. Link to comment Share on other sites More sharing options...
Subruise Posted August 19, 2013 Share Posted August 19, 2013 I have one in tacoma you can have for a sixpack of hamms if you can get out here 1 Link to comment Share on other sites More sharing options...
leniac Posted August 19, 2013 Share Posted August 19, 2013 Cut my be difficult. Temporarily spacing would probably be acceptable. maybe the torque will push it out anyway... try a bolt from other ea82... if you can look in some place... Link to comment Share on other sites More sharing options...
espey_16 Posted August 19, 2013 Author Share Posted August 19, 2013 I have one in tacoma you can have for a sixpack of hamms if you can get out here I might be able to get there tonight. 1 Link to comment Share on other sites More sharing options...
Subruise Posted August 20, 2013 Share Posted August 20, 2013 ill be home by 530 tomorrow (wed) sorry wasnt on the board all day Link to comment Share on other sites More sharing options...
man on the moon Posted August 20, 2013 Share Posted August 20, 2013 If you do end up having to cut a bolt, try sticking a screwdriver in the hole and mark the length you would need, cut a wee bit shorter than that. Hopefully you can find a straight replacement, though, of course. Link to comment Share on other sites More sharing options...
ivans imports Posted August 20, 2013 Share Posted August 20, 2013 a spaced ej bolt whould work i probly have ten on the floor 12/1.25 i think may be wrong by 1/34 inch somthing like that Link to comment Share on other sites More sharing options...
stichn56 Posted August 27, 2013 Share Posted August 27, 2013 I don't know how, but my crank pulley came off and the bolt is gone with the wind. I'm at the jy now but they don't have any ea82s here. Will one from an ej22 work? If not does anyone know what size and thread so I can go to the bolt store and buy one? you might be able to get the bolt by the head size. it's a 22 mm socket. if you find one, you might want to add some lock thread. small tube you can get at any auto parts store. runs about $3-5$. drip on threads prior to install. then torque to specs. hope this is helpful. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now