WJM Posted April 23, 2004 Share Posted April 23, 2004 XT6 vs the stock MPFI/Turbo one. And if you dare to look...my little collection...and an idea will form from all of that mess... http://www.pixiad.com/pix/WJM/DSCF2113.JPG Link to comment Share on other sites More sharing options...
baccaruda Posted April 23, 2004 Share Posted April 23, 2004 YOU'RE GOING TO CHOP UP AN XT6 INTAKE AND PUT IT ON AN EA82, AREN'T YOU?!?!? you sick sick puppy! go Will! edit: I love broadband! Link to comment Share on other sites More sharing options...
Subarutex Posted April 23, 2004 Share Posted April 23, 2004 XT6 seems very similar to the Spider TB... Is there a big difference in size? Seems that it would be way more work than what you'd gain to chop up an XT6 manifold and put it on a EA82T. Especially when you can just get a Spider intake. Link to comment Share on other sites More sharing options...
WJM Posted April 23, 2004 Author Share Posted April 23, 2004 Ive got a spyder laying there...and you just never know what Im going to do. Yes, there is a size difference between the spyder/regular TB VS the XT6 TB. I have not measured yet. Link to comment Share on other sites More sharing options...
Subarutex Posted April 23, 2004 Share Posted April 23, 2004 I'd like to know the size difference... and if the 4 holes match up.. Anyone else running a turned TB? I turned mine 90 degrees to clear the turbo to IC connector coming off the WRX turbo. Link to comment Share on other sites More sharing options...
WJM Posted April 23, 2004 Author Share Posted April 23, 2004 the 4 bolt holes *DO NOT* match up. 53.5MM vs 63.5MM is the size difference. The Spyder TB opening under the Thr. Plate is the same size as the stock TB, so that material would need to be removed, and new holes drilled for the new TB. Im going to get a little nutty on this project. The bolt pattern is slightly larger. I *think* you could *maybe* use two of the existing holes and then drill/tap the other two...i didnt mess with it that long to find out. I'll just center it over the original opening, mark and drill 4 new ones, and then trim it. And FYI: I am going to a spyder intake (SI for short, its official now!) with an XT6 TB, and I just have the XT6 upper intake for ideas and extra parts. Link to comment Share on other sites More sharing options...
Marck Posted April 23, 2004 Share Posted April 23, 2004 Last night, I took the throttle body off my spider intake that I recently got. The diameter of the throttle body from the spider is about 2.25 inches from where the intercooler hose would connect and 2 inches at where it connects to the intake manifold. The opening for the throttle body on the spider intake manifold is 2 & 1/16 inches. Now all we need is the specs of the XT6 throttle body. Link to comment Share on other sites More sharing options...
WJM Posted April 23, 2004 Author Share Posted April 23, 2004 look up! edit: that 63.5MM translates to 2.5 inches. Link to comment Share on other sites More sharing options...
Marck Posted April 23, 2004 Share Posted April 23, 2004 We replied at the same time, lol. Link to comment Share on other sites More sharing options...
WJM Posted April 23, 2004 Author Share Posted April 23, 2004 Ah, true! I see that now. Link to comment Share on other sites More sharing options...
Myxalplyx Posted April 23, 2004 Share Posted April 23, 2004 2.75" is what I measured on my 1989 XT6 FWD. I thought the XT6's throttle body was small. *Slapping myself* I called RC Engineering and they said they could bore it out a few mm for $250. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now