ThumbShyShane Posted September 17, 2013 Share Posted September 17, 2013 One of my favorite places is on the far side of a "critical habitat area" which has a restriction limiting recreational vehicles to 1,000 lbs. Any idea if that is remotely achievable? I'd like wide tires and some kind of fenders, but I'm willing to have it be stripped down to pretty much a frame and seats. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted September 17, 2013 Share Posted September 17, 2013 seems like you could, I would try Link to comment Share on other sites More sharing options...
ThumbShyShane Posted September 17, 2013 Author Share Posted September 17, 2013 Hey Scott! I used to live in the Bellingham area. Custer, actually. So I was wondering what vehicles would be best to use. Anyone have input regarding weight (light frame/engine/tranny/running gear etc), 4 wheel drive options (like 4low, locking diff etc)? Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted September 17, 2013 Share Posted September 17, 2013 (edited) I would go EA82 SPFI Dual range 85-89 one doner car, up grade to EJ22 if want, shorten it 12-20 ", weld up the diff , make your own frame, I would love to do one Edited September 17, 2013 by Scott in Bellingham Link to comment Share on other sites More sharing options...
Uberoo Posted September 17, 2013 Share Posted September 17, 2013 (edited) I would say 1000 lbs is doable ,but you will have to build your own "frame",you can't build one off an existing car though. A EA81 or EA82 vehicle should be able to provide everything you need.I would choose a EA81 because its more reliable.Measure everything relating to where the front and rear suspension mount.put the engine+crossmember+suspension assembly where you want it in the front and put the rear suspension where you want it in the rear.I would aim for a wheelbase 80-93".More or less put the rear tires right behind the front seats and have the fuel tank centered over the rear axle.Then build some sorta frame to connect everything and don't forget a roll bar/cage.Use aluminum floorboards,and use some plastic garden edging to cover the tires just so they wont pelt you with stuff,the rear 1/2 of the front tires and the front half of the rear tires.. that should keep you right around 1000LBs,run 27-29" tires because the bigger tires add weight. I just scraped a hatch with no engine,rear suspension, or fuel tank it weighed 1600lbs.I also had a bunch of stuff inside the car like the steel bits from an EJ22,it also had all the glass. Edited September 17, 2013 by Uberoo Link to comment Share on other sites More sharing options...
Legacy777 Posted September 17, 2013 Share Posted September 17, 2013 I'm going to move this to the Retrofitting forum. You will probably get some additional feedback there. Link to comment Share on other sites More sharing options...
ThumbShyShane Posted September 17, 2013 Author Share Posted September 17, 2013 Thanks Scott, Uberoo and Legacy! All very helpful. Anyone have any helpful advice? Link to comment Share on other sites More sharing options...
Gloyale Posted September 17, 2013 Share Posted September 17, 2013 Hate to say it but I don't think that's realistic with subaru drivetrain Engine, trans, diff, and wheels/tires weigh about 600lbs. Not to mention axles, seats, a frame......and of course the driver. If it is possible it would definately have to be a VERY lightweight tube frame with no glass, doors. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted September 17, 2013 Share Posted September 17, 2013 Hate to say it but I don't think that's realistic with subaru drivetrain Engine, trans, diff, and wheels/tires weigh about 600lbs. Not to mention axles, seats, a frame......and of course the driver. If it is possible it would definately have to be a VERY lightweight tube frame with no glass, doors. is that the good estimate 600# , wonder what the complete stock drivetrain weighs, Link to comment Share on other sites More sharing options...
AdventureSubaru Posted September 19, 2013 Share Posted September 19, 2013 A few other tidbits to think about. Hatches and Coupes will be lighter than the sedans and wagons. Aluminum rims vs. steel will give a small assist in that lightweight category. As will narrower tires. Tube frame and/or lots of chopping. I think the hatches had a stock weight of just over a ton. That's a lot of deleting and not much room to beef things up for off roading. (Spare tire, parts etc.) I think that 600 estimate has to be close. Anyone with a subaru buggy ever put one on a scale? Link to comment Share on other sites More sharing options...
turbosubarubrat Posted September 19, 2013 Share Posted September 19, 2013 ea81's weight like 350 pounds(trust me you dont want to pick it up year self), transmission's are around 150, so just there is half the buggies wieght, then theres the rear differential, axels, hubs, suspension, wheels, tires, the frame, gas tank plus fuel, ect. and you. If your going to make it under a 1/2 ton your going to have to be creative and cut down every way you can and use a lot of lite durable materials. Link to comment Share on other sites More sharing options...
ThumbShyShane Posted September 19, 2013 Author Share Posted September 19, 2013 Thanks so far everybody! The vehicle can be weighed empty. No driver, no fuel. Link to comment Share on other sites More sharing options...
apintonut Posted September 19, 2013 Share Posted September 19, 2013 (edited) Im building one right now to my best guess is im going to be 900-1100 lb my frame is only about 150 lb. I could probly save wieght buy spending more money but im trying to keep the price under 500$ if you built your own suspension and i think legacy would be easyer than ea82 Edited September 19, 2013 by apintonut Link to comment Share on other sites More sharing options...
NorthWet Posted September 19, 2013 Share Posted September 19, 2013 ea81's weight like 350 pounds(trust me you dont want to pick it up year self), I can easily carry an EA81 around... they are about 100-150 lbs, depending on what (flywheel/clutch, accessories) is still on it. EA82s weigh a bit more, mostly due to their extra camshaft and parts. EJ's are beefier and weigh a little too much for me to carry around. Link to comment Share on other sites More sharing options...
AdventureSubaru Posted September 20, 2013 Share Posted September 20, 2013 ea81's weight like 350 pounds(trust me you dont want to pick it up year self), transmission's are around 150, so just there is half the buggies wieght, then theres the rear differential, axels, hubs, suspension, wheels, tires, the frame, gas tank plus fuel, ect. and you. If your going to make it under a 1/2 ton your going to have to be creative and cut down every way you can and use a lot of lite durable materials. EA81 is 135lbs. EA82 is 155. EJ18 is 170 and EJ22 is 185. I carry EA81s no problem. A little awkward to hold onto but they are very light engines. The trans I'd guess to be about 2/3 the engine. I think if you went with an EA81 platform you could make this happen. 1 Link to comment Share on other sites More sharing options...
turbosubarubrat Posted September 20, 2013 Share Posted September 20, 2013 I can easily carry an EA81 around... they are about 100-150 lbs, depending on what (flywheel/clutch, accessories) is still on it. EA82s weigh a bit more, mostly due to their extra camshaft and parts. EJ's are beefier and weigh a little too much for me to carry around. I over estmated it because it was late but factory subaru manual says 238 pounds and that is standard so just with a alternator so it doesn't include the weight of power steering and ac condensor and all the other stuff i was thinking of when giving probably what you would call a max weight of a ea81 i quess im spoiled to be working with the ea81t motors and was thinking more of along those lines instead of a ea81 but aleast you can find good heads for a ea81. It just makes me want to stay with the ea81 in my brat with hopefully a weber carb sometime and keep on rolling. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now