northguy Posted April 24, 2004 Share Posted April 24, 2004 I'm dropping the rear axle/torsion bar/differential to install the 3" lift and am watching the brake line get very tight. I've loosened the fold over keepers on the swing arms, but that doesn't seem to give any relief. I fear that if I lower the rear assembly low enough to put the blocks in I'll break the brake lines. Should I cut the L bracket that holds the brake lines to the body? Are they essential to brake operation? Any help is appreciated. Link to comment Share on other sites More sharing options...
ezapar Posted April 24, 2004 Share Posted April 24, 2004 Sent you an email. Link to comment Share on other sites More sharing options...
northguy Posted April 24, 2004 Author Share Posted April 24, 2004 Thanks Eric. I looked around at postings and pics of everyone's installs and couldn't find any other mention of this problem. I'll be back at it in the morning. Link to comment Share on other sites More sharing options...
NoahDL88 Posted April 24, 2004 Share Posted April 24, 2004 This may be premature, but welcome to the world that rides a few inches higher than the rest, i thought the lift was the greatest thing ever for my subie, then i found out that swampers could fit after the lift, and i never looked back. congrats, take it nice and easy or you'll strip bolts like i did when i put mine in. Link to comment Share on other sites More sharing options...
ezapar Posted April 24, 2004 Share Posted April 24, 2004 I sent you a bigger photo Matt, but for future reference, here's one for the manual. (or whatever) EZ Link to comment Share on other sites More sharing options...
Snowman Posted April 24, 2004 Share Posted April 24, 2004 Hmmm... that's an interesting predicament. I seem to remember hearing that on the front you would just remove the brake line from its holder and either let it dangle or attach it somewhere else. I think I'll be out there by three to provide what assistance I can. My class is meeting at 10 today, and it could go anywhere from 2-5 hours, but I'll zip out there directly afterward. Are there any special tools or or other parts or anything that I can get before I head out? Link to comment Share on other sites More sharing options...
northguy Posted April 25, 2004 Author Share Posted April 25, 2004 Kelly, thanks again for the help. And Zap, thanks for the tip on the brake lines. The lift is in, it euns great and it looks so much better (I'm so happy I'm half tempted topost a dancing banana, bit I won't). Link to comment Share on other sites More sharing options...
TheSubaruJunkie Posted April 25, 2004 Share Posted April 25, 2004 Northguy, its good to hear you got your lift and it seems like you tackled the install without any snags as well. Congrats!! I ran into a rear brakeline problem on my lift as well. Turned out there was a clip on the rear of the torsion bar I didnt see. When should we expect to see some pix? -Brian Link to comment Share on other sites More sharing options...
northguy Posted April 25, 2004 Author Share Posted April 25, 2004 I'll try to post pics in the next day or so. I would never have been able to install one of those in my younger days. I was too impatient and would have ended up stripping out a bunch of stuff. Wrenching teaches patience, and it's good to have a competent partner who doesn't conplain when the first thing you do is hit him in the forehead with the steering extension . Thanks again for the help, Kelly. Link to comment Share on other sites More sharing options...
ezapar Posted April 25, 2004 Share Posted April 25, 2004 Welcome to the world of the lifted! Good for you Matt. Glad I could help. EZ Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now