rkautar Posted September 28, 2013 Share Posted September 28, 2013 (edited) Can someone please tell me a couple of things - 1. Where is the TCM located and 2. which solenoid inside the transmission pan is the line pressure control solenoid. I want to find the problem with my car going into 3rd strainght after moving from 1st and that is where it stays. I have checked the Dropping resistor which is ok. Thanks Raman Edited September 28, 2013 by rkautar Link to comment Share on other sites More sharing options...
Olnick Posted September 28, 2013 Share Posted September 28, 2013 Welcome to USMB, Raman. If you will put your query in the "Newer Generations--1990 to Present . . . " forum you'll have a better chance of getting answers. Link to comment Share on other sites More sharing options...
idosubaru Posted September 28, 2013 Share Posted September 28, 2013 maybe a mod can move this to New Gen? is the transmission light blinking 16 times at start up - if so it has a stored code to tell you if you can figure out the crazy NSA handshake to get the light to blink you the code. TCM is right above your feet when you're driving. little silver (color may vary) box bolted up under the dash. like two screws hold it in place, real simple. TCM failure on Subarus is extremley rare, I wouldn't expect that to be the issue but maybe you're just looking for wires to test with. any history on the car? accidents, or...? if trans pan got dented that could infringe upon some wiring. Link to comment Share on other sites More sharing options...
Legacy777 Posted September 29, 2013 Share Posted September 29, 2013 Moved. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now