belacane Posted October 13, 2013 Share Posted October 13, 2013 (edited) Looking to do a d/r swap on a 1980 brat. Will a dual range trans from a 2nd gen brat from 1982 bolt up with 1st gen brat from 1980. I'm aware the that 1980 brat came as a single range. If any, what mods are needed to make the transplant work? Thanks! Edited October 13, 2013 by belacane Link to comment Share on other sites More sharing options...
SuperBrat Posted October 13, 2013 Share Posted October 13, 2013 81 Brat with old body style had dual range 4x4 the 1980 did not....... Link to comment Share on other sites More sharing options...
Leeroy Posted October 14, 2013 Share Posted October 14, 2013 Firstly a 1980 Brat will have a top mount starter, all dual range transmissions are side mount starter... If you source a EA71 'fat case' bellhousing (side starter) that would be a start but there are still other issues such as the shifter linkages and in some instances the drivers DOJ might end up very close to the steering shaft. Having stated that, it has been done before! Might be a good idea to search the forum for previous threads on this subject as it does come up fairly often. Link to comment Share on other sites More sharing options...
belacane Posted October 14, 2013 Author Share Posted October 14, 2013 Thank you Leeroy. Link to comment Share on other sites More sharing options...
Markus56 Posted October 14, 2013 Share Posted October 14, 2013 When i put a D/R in my '80 Brat, I ended up swapping everything over. I took out all the EA-71 stuff and replaced it all with EA-81. Engine, tranny, alternator, distributor, coil etc. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now