JKinPA Posted November 5, 2013 Share Posted November 5, 2013 Hey, How long should a serpentine belt on a 2006 Tribeca last? We had a new one put into the car about 26,000 miles ago and are now being told we need a new one. (the car makes a rattling noise when you first start it up.). Thank you Joe Link to comment Share on other sites More sharing options...
avk Posted November 5, 2013 Share Posted November 5, 2013 It's not the belt, it's the idler and/or tensioner pulleys. A well-known wear item for the 6-cyl. engine. I checked the pulleys at 60K and found noticeable play, so they were replaced preventatively. I did replace the belt because the old one was off anyway, but there was nothing wrong with the old one. Link to comment Share on other sites More sharing options...
JKinPA Posted November 5, 2013 Author Share Posted November 5, 2013 Thank you...The tensioner pulleys don't seem difficult to change out just a bit of a pain in the neck to get to...is that accurate? After the car warms up we don't hear the rattle any more...I was thinking it could also be valve slap but after 94K im willing to try them Thanks Joe Link to comment Share on other sites More sharing options...
avk Posted November 5, 2013 Share Posted November 5, 2013 (edited) It's not hard, just remove the "H6" cover and also the air intake horn to gain more room for the ratchet. Some money can be saved by either replacing bearings, or buying generic pulleys: it's all beaten to death on subaruoutback.org. As to the valves, I seems no one was ever able to adjust valves on this engine as regular maintenance, with engine installed in the car (if someone proves me wrong, I'd be happy to hear how they did it). Edited November 5, 2013 by avk Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now