Jump to content
Ultimate Subaru Message Board

EA82 reseal/headgasket shopping list...


Recommended Posts

So am I missing anything?

-Heads- resurfaced, valve grind and new valve stem seals.

Oil Pump gasket (mickey mouse) -- 15066AA000 from Subaru

Water pump from Aisin -- WPF-003 from Aisin

WP by pass -- 807615041 from Subaru OEM

Oil pump o-ring from Subaru OEM

Timing belt kit -eBay

Cam Case O-Rings (2) -- 13089AA010 from Subaru OEM

Front main seal from timing belt kit

Rear main seal (one I have is orange, the one on the motor is black...)

Cam seals -- 806738040 from Subaru OEM

Oil pan gasket -- 11121AA001 from Subaru OEM (and RTV)

Valve cover grommets -- 13271AA051 from Subaru (expensive, I only needed 1 to complete my set of them since I gave one to a friend of mine)

Valve cover gasket kit -- X1321-AA999

Graphite OEM head gaskets -- 899235

Intake gaskets (part number soon, gonna get OEM like suggested)

Exhaust gaskets

Upper rad hose -- 45161GA490 from Subaru OEM

Lower rad hose -- 45161GA500 from Subaru OEM

New clutch will be ordered soon. Exedy 15008

 

Wish I knew of a good radiator shop that was open on weekends as I want my radiator worked on, and checked since I know the oil and coolant have been mixing... And I wanna make a weekend project out of this...

 

Should have the engine assembled within the month :)

 

Edit: Some part numbers added, will keep adding as I get more parts...

Edited by 92_rugby_subie
  • Like 2
Link to comment
Share on other sites

Okay, so I just ordered the little o-rings, he asked if I needed big ones or little ones, I said they were decently small last I checked, so Im assuming those are the cam carrier ones... Ill have this list RE-Done with OEM part numbers on what I got from the dealership and try to keep it as clean as possible.

Link to comment
Share on other sites

I updated the post with the part numbers on what I currently have.

 

Radiator will be pulled and sent to Macs Radiator for repaint, leak test and complete flush :D they are one of the few open on a weekend, so I can pull the radiator on a friday and get it back monday and back in the car :D

Link to comment
Share on other sites

Make certain the intake gaskets are OEM only. Anything else will fail prematurely.

The dealer sold me ones that have 2 holes each. How do I make sure they get the right ones? Does anyone have a part number for the correct gaskets, or does the Fel Pro set work OK?

Link to comment
Share on other sites

Mandalore, the reason he is putting this list together is that the OEM items are much higher quality than those "eBay specials". Would you want to go through the hassle of rebuilding the engine, only to have a cheap piece of spoob chinese gasket fail about 1000 miles later?

Link to comment
Share on other sites

So am I missing anything?

-Heads- resurfaced, valve grind and new valve stem seals.

Oil Pump gasket (mickey mouse) -- 15066AA000 from Subaru

Water pump from Aisin -- WPF-003 from Aisin

WP by pass -- 807615041 from Subaru OEM

Oil pump o-ring from Subaru OEM

Timing belt kit -eBay

Cam Case O-Rings (2) -- 13089AA010 from Subaru OEM

Front main seal from timing belt kit

Rear main seal (one I have is orange, the one on the motor is black...)

Cam seals -- 806738040 from Subaru OEM

Oil pan gasket -- 11121AA001 from Subaru OEM (and RTV)

Valve cover grommets -- 13271AA051 from Subaru (expensive, I only needed 1 to complete my set of them since I gave one to a friend of mine)

Valve cover gasket kit -- X1321-AA999

Graphite OEM head gaskets -- 899235

Intake gaskets (part number soon, gonna get OEM like suggested)

Exhaust gaskets

Upper rad hose -- 45161GA490 from Subaru OEM

Lower rad hose -- 45161GA500 from Subaru OEM

New clutch will be ordered soon. Exedy 15008

 

Wish I knew of a good radiator shop that was open on weekends as I want my radiator worked on, and checked since I know the oil and coolant have been mixing... And I wanna make a weekend project out of this...

 

Should have the engine assembled within the month :)

 

Edit: Some part numbers added, will keep adding as I get more parts...

 

 

 

                 How much did the oem headgaskets cost you ??

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...