marcusgl10z28 Posted December 16, 2013 Share Posted December 16, 2013 (edited) Im testing waters For this to see if there is any interest in this But im looking to sell already converted front and rear hubs for l series cars. The conversion is from 4x140 lug pattern to 6x5.5 toyota nissan ford chevy dodge...etc lug pattern. Offering many wheel and tire options for your car.I will be offering a bolt on package For $160 Plus shipping to you Or pick up from me if you feel you want to drive To me. Rear disc brake conversion are on a very slim occasion Unless you provide them to me. Package includes 4 studs per hubwith ... 2 front hubs and 2 rear drums used, new is avalable but cost extra And all 8 extra studs extra(unless provided or sent without, Hubs can be painted black for $10 more or sold bareI will also be able to convert your existing hubs for 25 / corner if you supply 8 extra oem studs. Estimate 1 week turn around For all orders as i do work full time and have A family.Thank youMarcusTacoma waAny questions Or concerns please ask... trading is welcome and offers are as well. Edited January 29, 2014 by marcusgl10z28 Link to comment Share on other sites More sharing options...
nick1208 Posted December 16, 2013 Share Posted December 16, 2013 Marcus just re-drilled mine yesterday and did a killer job. him drilling the pilot holes. all 6 drilled. Not using the 9/16'ths bit. the 9/16 will leave too much room and the stud would need to be welded. with the bit Marcus is using there is just enough room for the stud to fit snug. here's what it looked like on my car drilling the rear disks and the wheel fit perfectly! Marcus definitely takes his time and does a good job. We started around 9:30 and finished around 4:30. Link to comment Share on other sites More sharing options...
liftedlife Posted January 17, 2014 Share Posted January 17, 2014 hey I have an 81 gl wagon an want to go from the 4x140 to 6x5.5 an was wondering what size bit do you use? Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted January 17, 2014 Author Share Posted January 17, 2014 (edited) Uh oh Edited January 17, 2014 by marcusgl10z28 Link to comment Share on other sites More sharing options...
92_rugby_subie Posted January 26, 2014 Share Posted January 26, 2014 Uh oh What did I miss? Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted January 29, 2014 Author Share Posted January 29, 2014 What did I miss? nothing... but when are we doing your conversion.. i know yur wheels a pretty but it could use some mud terrains..lol Link to comment Share on other sites More sharing options...
Tobyz Posted March 9, 2014 Share Posted March 9, 2014 How Much Would Shipping Of A Complete Set Be To 59825? Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted March 9, 2014 Author Share Posted March 9, 2014 Pm Link to comment Share on other sites More sharing options...
sxe111 Posted March 11, 2014 Share Posted March 11, 2014 Do you still have hubs available? I had the 6 lug done a few years ago and the fronts were not drilled very well. I had to weld my studs in. If you have any, how much for just the front set, no studs and unpainted shipped to 32404? Thank you Link to comment Share on other sites More sharing options...
belac88 Posted March 12, 2014 Share Posted March 12, 2014 Would be perfect for my 87 gl turbo coupe. How much for all 4 corners painted and everything. Shipped to 95947 Thanks a bunch Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted April 8, 2014 Author Share Posted April 8, 2014 180 flat shipped almost anywhere and painted black or red... sorry bout the very untimely response.. forgot bout the thread. sets must be paid for in advance and its a 1 week turn around still then shipping time. Thanks marcus Link to comment Share on other sites More sharing options...
yiannib Posted June 3, 2014 Share Posted June 3, 2014 Where are you located? 1 Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted June 3, 2014 Author Share Posted June 3, 2014 Tacoma wa Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted November 16, 2014 Author Share Posted November 16, 2014 Bump Link to comment Share on other sites More sharing options...
islandjon Posted March 4, 2015 Share Posted March 4, 2015 Do you have some ready to go? A friend might be needing a quick set. Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted March 4, 2015 Author Share Posted March 4, 2015 I'm in a shop transition at the moment. Sorry I do not,but I will very soon here. Thanks Marcus Link to comment Share on other sites More sharing options...
comatosellama Posted May 1, 2015 Share Posted May 1, 2015 Could you sell a set of just the lugs? Link to comment Share on other sites More sharing options...
donuteater Posted May 19, 2015 Share Posted May 19, 2015 Bump, very interested in all four corners. Link to comment Share on other sites More sharing options...
donuteater Posted May 22, 2015 Share Posted May 22, 2015 (edited) sorry please delete Edited May 22, 2015 by donuteater Link to comment Share on other sites More sharing options...
donuteater Posted May 22, 2015 Share Posted May 22, 2015 (edited) sorry please delete Edited May 22, 2015 by donuteater Link to comment Share on other sites More sharing options...
donuteater Posted May 22, 2015 Share Posted May 22, 2015 (edited) sorry please delete Edited May 22, 2015 by donuteater Link to comment Share on other sites More sharing options...
donuteater Posted May 22, 2015 Share Posted May 22, 2015 (edited) sorry please delete Edited May 22, 2015 by donuteater Link to comment Share on other sites More sharing options...
donuteater Posted May 22, 2015 Share Posted May 22, 2015 Does any know Marcus personally? Is he still machining parts? Link to comment Share on other sites More sharing options...
marcusgl10z28 Posted July 28, 2015 Author Share Posted July 28, 2015 Sorry to randomly pop back in but I will be drilling up a few sets of hubs in August and will have them up for sale If anyone is interested. I'm not on this board much anymore unfortunately and my workload is over my headbut iI will try and feed the needs of the community to the best of my abilities. My personal phone is 3603382537. That is the best way to get ahold of me. Thanks a lot Marcus landron Link to comment Share on other sites More sharing options...
donuteater Posted November 8, 2015 Share Posted November 8, 2015 Marcus drilled my hubs, was always easy to get a hold of, and answered my dumb questions. The new holes fit the studs well and he did a great job. Thanks for the work Marcus, Donut 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now