2.5LOYALE Posted December 18, 2013 Share Posted December 18, 2013 So who are the new guys making lift kits for the ea82's nowadays ? Been away from the board for a minute or two.. Link to comment Share on other sites More sharing options...
bratman18 Posted December 18, 2013 Share Posted December 18, 2013 Highguyslifts.com What size are wanting? Link to comment Share on other sites More sharing options...
2.5LOYALE Posted December 18, 2013 Author Share Posted December 18, 2013 4 inch I believe to keep the axels as close to the stock geometry.. The 2 inch I have now is all suspension and it seems to ride on its toes \. / looking for a good solid complete kit Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted December 18, 2013 Share Posted December 18, 2013 www.sjrlift.com Link to comment Share on other sites More sharing options...
2.5LOYALE Posted December 23, 2013 Author Share Posted December 23, 2013 Any other peoples? Link to comment Share on other sites More sharing options...
El Presidente Posted December 23, 2013 Share Posted December 23, 2013 IMHO Homemade is the way to go. It will cost you about a third of a shelf bought kit and you can have the pride of knowing its built, not bought. Plus if you ever go to sell it, you can probably get your money back if you put some quality into it. If your 2 inch is positive cambered, you just might need new blocks, they should sit at almost zero camber. Josh 2 Link to comment Share on other sites More sharing options...
ford'ssubaru's Posted December 30, 2013 Share Posted December 30, 2013 Did two of em and helped a couple a kids with theirs....LOL. Link to comment Share on other sites More sharing options...
2.5LOYALE Posted January 12, 2014 Author Share Posted January 12, 2014 I wanna pick up a set of rear strut top mounts for a 2 inch lift... Anybody have some? They look something like these or a direction where to get them? Link to comment Share on other sites More sharing options...
apintonut Posted January 16, 2014 Share Posted January 16, 2014 Sjr sell pieces too just pm him Link to comment Share on other sites More sharing options...
apintonut Posted January 16, 2014 Share Posted January 16, 2014 (edited) http://m.oreillyauto.com/mt/www.oreillyauto.com/site/c/detail/MON8/58643.oap?ck=Search_58643_-1_3716&keyword=58643 Dont know if these are stiff enough they do fit 2005+ ford f150 they are the longest monroe coil over 10.15/16" of travel stocking item too these would need a new upper mount These are stock http://www.oreillyauto.com/site/c/detail/MONM/71268/03415.oap?year=1989&make=Subaru&model=DL&vi=1268119&ck=Search_C0077_1268119_3716&pt=C0077&ppt=C0035 These are 3" longer and 2" more travel than stock but should bolt on in place of stock http://m.oreillyauto.com/mt/www.oreillyauto.com/site/c/detail/MON8/58551/03415.oap?year=1973&make=Chevrolet&model=Camaro&vi=1034930&ck=Search_C0077_1034930_3716&pt=C0077&ppt=C0035 That is untested however I feel it should im buying the longer ones anyway if some one wants to test fit them on a car and I have the ones with the pins on my pinto and it lifted it very nicely Edited January 16, 2014 by apintonut Link to comment Share on other sites More sharing options...
nkmilesAE95 Posted January 21, 2014 Share Posted January 21, 2014 (edited) 4 inch I believe to keep the axels as close to the stock geometry.. The 2 inch I have now is all suspension and it seems to ride on its toes \. / looking for a good solid complete kit Highguyslift.com - just ordered a lift from these guys myself. They offer a 3" and a 4" that are "full drop" thus keeping all geometry at stock angles. To my knowledge, SJR doesn't offer such a kit. All of his kits stress axles 1" over stock geometry. I went with the 3" full drop as my 88 GL spends 90% on the pavement. Gloyale is the guy to contact if you are interested in the highguyslift - from my experience, it may take him a bit of time to get back to you - but he will and can answer any questions you have about their stuff. Only down fall is that they are made to order, as are SJR kits. Highguys are currently waiting on steel to produce my strut toppers I will follow up with quality of construction etc when it arrives... Edited January 21, 2014 by nkmilesAE95 Link to comment Share on other sites More sharing options...
2.5LOYALE Posted January 22, 2014 Author Share Posted January 22, 2014 That was just the input I was looking for I'm gonna check them out and read up on it...thanks man and keep me updated on quality and such.. Eric. Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted January 22, 2014 Share Posted January 22, 2014 I can custom build whatever someone wants, yes most the kits online are 1" over on axle stress, except for the EA81 and the rear on 2000+ cars, Scott with SJR 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now