Uberoo Posted December 30, 2013 Share Posted December 30, 2013 So I pulled my gen 1 brat project into the garage to work on swapping in EA81 suspension front and rear as well as lifting it,However, due to the nature of project vehicles the bed is full of parts and their is no engine so it sits kinda funky. So I am looking for the rear unloaded ride height of a gen 1 brat. Preferably one thats stock with a rollbar.A good measurement might be from the divit in the axle to the top of the wheel arch,or from the jacking point to the ground on a level surface,etc. thanks in advance. Link to comment Share on other sites More sharing options...
spicypeanut Posted December 30, 2013 Share Posted December 30, 2013 I'll try to take some measurements when i get home. Link to comment Share on other sites More sharing options...
Uberoo Posted January 4, 2014 Author Share Posted January 4, 2014 were you ever able to measure that? Link to comment Share on other sites More sharing options...
RustyBrat Posted January 4, 2014 Share Posted January 4, 2014 26" from the ground to the top of the rear fender Link to comment Share on other sites More sharing options...
Uberoo Posted January 5, 2014 Author Share Posted January 5, 2014 (edited) Sweet thanks! Now to support the rear at 29" and pull the suspension and work on mocking up where the Ea81 rear suspension should go. Edited January 5, 2014 by Uberoo Link to comment Share on other sites More sharing options...
RustyBrat Posted January 5, 2014 Share Posted January 5, 2014 yep just remembered i measured mine after the 4 inch lift and it sits at 30.5 now Link to comment Share on other sites More sharing options...
spicypeanut Posted January 5, 2014 Share Posted January 5, 2014 Sorry, I've been away from the computer the last day or so. I would go with the measurements from rustrybrat as I just noticed my rear shocks are possibly shot. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now