Jump to content
Ultimate Subaru Message Board

Q's about lowering EA82 the factory way


Recommended Posts

XT front struts/springs will bring it down aeounds 2 inches...the rear springs is what you want, as the XT struts for the rear will actually raise you up. The springs will bring it down 1/2 to 1 inch.

Link to comment
Share on other sites

Ok, now the question I really want answered. What will these to the front of an EA81? I know RX springs will raise the front about 1", so the XT springs will take away that one inch, then lower it 3/4 of an inch below the stock height? Probably the net gain on my car will be less because it is on a turbo wagon and they're lower already. Would I be able to use EA82 struts on my EA81?

Link to comment
Share on other sites

  • 3 years later...
XT front struts/springs will bring it down aeounds 2 inches...the rear springs is what you want, as the XT struts for the rear will actually raise you up. The springs will bring it down 1/2 to 1 inch.

 

eureka

 

xt springs on 4wd wagon struts will lower it 1 inch is this what im hearing.

 

Ben

Link to comment
Share on other sites

  • 4 months later...
XT springs WILL lower your EA82, but by how much, I'm not sure.

 

well i just found this out so bear with me. the xt6 springs and struts will lower about 2 inches but its the rear where it gets confuseing. I know flip the top hats but i didnt hear about useing xt rear springs. Which strut would you use then for the back.

 

Ben

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...