1-3-2-4 Posted January 20, 2014 Share Posted January 20, 2014 Odd.. I added a new gasket and I have a Aisin water pump with the OEM thermostat so, after I put the gasket on the T-stat I tried to put the cover on and the pointy end of the thermostat was hitting the plastic housing of the t-stat cover.. I don't get it.. I pushed the thermostat in as far as it goes and still would not mate up.. Anyone know why? Link to comment Share on other sites More sharing options...
nipper Posted January 20, 2014 Share Posted January 20, 2014 like this? Link to comment Share on other sites More sharing options...
1-3-2-4 Posted January 20, 2014 Author Share Posted January 20, 2014 His is way shorter mine has about a 1 inch gap. .. I don't get it never had a issue doing the thermostat before until now. When I get back home I will show a picture Link to comment Share on other sites More sharing options...
1-3-2-4 Posted January 20, 2014 Author Share Posted January 20, 2014 (edited) video uploading now, I just don't get it.. meanwhile here is a picture how it's installed http://img689.imageshack.us/img689/7659/t2x6.jpg holy crap haha I saw what the issue was.. too embarrassed to tell but it was the hose clamp for the heater bypass lol I guess that's what happens when you are up for over 10 hours... Edited January 20, 2014 by 1-3-2-4 Link to comment Share on other sites More sharing options...
nipper Posted January 20, 2014 Share Posted January 20, 2014 hehe thats ok, as i was going to start blame evil Garden Gnomes next. Glad it resolved itself. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now