Uberoo Posted January 21, 2014 Share Posted January 21, 2014 I dropped the fuel tank on my gen 1 brat,and I am thinking it might be better to swap in a different tank.My brat sat in a field for 10 years with no gas cap,so the tank had some of the worst smelling gas/varnish I have ever seen.It also has a layer of black sludge about a inch and half think on the bottom of the tank.not to mention all sorts of dirt...yea its nasty.While I could clean it out I am not to thrilled with the 11 gallon capacity.So I was wondering if anyone has ever put a different fuel tank in?I will use a EA81 rear suspension and i'm not afraid of cutting the bed above the tank, just as long as I dont cut the "frame" structure out. Without cutting the frame I could fit a tank roughly 31x20", height is relative. so has anyone fit a bigger tank on a gen 1 brat or does anyone know of a roughly rectangular tank measuring 31x20xH with a driver side filling neck? Link to comment Share on other sites More sharing options...
moosens Posted January 21, 2014 Share Posted January 21, 2014 Fuel cells are usually a good idea for many older vehicles. Check suppliers like SummitRacing ,etc..... http://www.summitracing.com/search/part-type/fuel-cells/usage/road-race?SortBy=Default&SortOrder=Default&mbid=SRE102652 Link to comment Share on other sites More sharing options...
Uberoo Posted January 21, 2014 Author Share Posted January 21, 2014 anything a bit more budget friendly? Link to comment Share on other sites More sharing options...
RustyBrat Posted January 21, 2014 Share Posted January 21, 2014 Strap a couple jerry cans in the bed Link to comment Share on other sites More sharing options...
Uberoo Posted January 21, 2014 Author Share Posted January 21, 2014 I could always add a tank in the space between the crossmember and the cab.. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now