Ryan1003 Posted April 30, 2004 Share Posted April 30, 2004 I just bought a 93 loyale with 177,000 miles on it and the CEL came on while driving it to work... Autozone only can read 96+... w/o taking it in to get checked does anyone have any idea how i can find out what it is?? Link to comment Share on other sites More sharing options...
GLCraig Posted May 1, 2004 Share Posted May 1, 2004 Here's a good place to start http://usmb.net/repair/?CurrentDirectory=FOLDER_3f29b58f4430b8.49200047/&FileType=Article&File=ARTICLE_3f2c055f4862e9.39782181.art Link to comment Share on other sites More sharing options...
Silent Bob Posted May 1, 2004 Share Posted May 1, 2004 Subaru has thoughtfully made this easy. Remove the trim panel under the dash on the drivers side and locate the engine control module. There willl be an LED on one end of it. Turn the ignition key to the "on" position, the LED will start blinking the codes it has stored. Consult your haynes or other manual to figure out what all the blinking actually means. :cool: (at least that's how it works on my 91) Link to comment Share on other sites More sharing options...
Natrboy Posted May 1, 2004 Share Posted May 1, 2004 Hey there ryan. I just bought a 93 loyale. I am by no means a car expert. But all the research I have done before buying this car says that this is a common occurance with this year and model. I have read that people get the CEL light and take it to the dealer and nothing is wrong. That doesn't mean not to check the ECM for any codes. My loyale is giving me the same light, but it isn't on all the time. Not that, that means anything. Link to comment Share on other sites More sharing options...
subaru_styles Posted May 1, 2004 Share Posted May 1, 2004 most of the time it's an O2 sensor that has gone bad Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now