nilson Posted January 29, 2014 Share Posted January 29, 2014 Have a legacy 97 outback GTwant to pull gearbox manual & engine ej25. Into my 97 impreza outback 2.2 4AT Wanna now were I am going with that I understood that i am pretty covered with my legacy doner Thanks and will happy for advise Link to comment Share on other sites More sharing options...
MilesFox Posted January 29, 2014 Share Posted January 29, 2014 You have all the parts from the donor to physically swap. Carry over the driveshaft with the trans. The engne will be plug and play, but you will lose the EGR, gain a CEL. You will also have to defeat the neutral safety switch by jumpering the harness at the shifter, or making a push button directly to the starter. The ej25 may be prone to premature head gasket failure. You can, if you wish, swap the ej22 heads onto the ej25 block. You will gain compression, and be able to keep the dual port header, and keep the original intake and retain the EGR valve as to not have a check engine light. Link to comment Share on other sites More sharing options...
nilson Posted January 30, 2014 Author Share Posted January 30, 2014 ThAnks man really useful info You recommend do this head swap ? Sound like a rational good idea Link to comment Share on other sites More sharing options...
nipper Posted January 30, 2014 Share Posted January 30, 2014 Watch rear diff ratios. I would imagine they are different between the outback and the Imp, but I am not sure, just something to be aware of. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now