Jump to content
Ultimate Subaru Message Board

Newbie question please help...


Recommended Posts

BTW, as a newbie, you may not realise that 1984 was when Subaru changed bodyshells. So if you're going to ask for help, you need to clarify whether you've got the earlier shape or the later one like in your link. There was a GL model in both bodystyles. While some parts are interchangable, others are radically different.

 

It will help people to help you. ;)

Link to comment
Share on other sites

yes it will fit. Does your subaru look like the one you posted or is yours more rounded?If it looks like yours then its a straight bolt in deal.If its more rounded then you have to take a die grinder or a file to the bottom of your bellhousing because that transmission uses a flywheel that is slightly larger than yours(filing take about 5 minutes with a file or a couple of seconds with a grinder,its not bad at all.

For both body styles(round or square) you will need the axles from that car as well as the rear diff.

Automatic/ subarus have a 25 spline front axle spline count while manual cars have a 23 spline axle.Also turbo/automatic cars got a 3.7 rear diff ratio while the non turbo manual cars got a 3.9 rear ratio.Hope that helps.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...