Brutewrench Posted May 3, 2004 Share Posted May 3, 2004 Hi all, I have been working on a 1990 Legacy (AT 2wd) trying to solve a flatness and rough running at part throttle. I pulled off the air inlet assembly from the intake manifold and cleaned significant dark residue from it. I noticed a needle valve on the top of this unit that seems to affect idle speed and smoothness and was seeking information on how to properly adjust it. I marked it as I removed it and reset it to the same position for the moment. Since it still was not running perfectly, I did the ECU read with the black connector. It showed an oxygen sensor failure (32). Then I did the driving test using the green connector. It did not behave like any of the articles I read on the subject. When I drove it, I got a 30 code - 3 long flashes that repeated. I replaced the O2 sensor. The car does run better, but not perfect. I can not figure out the best way to clear the fault code - the 32 is still coming up. I do not know if that means the car has another related problem or whetner it means that I just have not rest the ECU correctly. Thanks for any tips, Gary Link to comment Share on other sites More sharing options...
DerFahrer Posted May 3, 2004 Share Posted May 3, 2004 Look on Josh's (Legacy777) website www.surrealmirage.com/subaru for trouble code tips and clearing codes... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now