rdweninger Posted August 13, 2014 Share Posted August 13, 2014 If you go zip tie, I have heard that the exhaust heat will make the ties brittle after some time. I have my exhaust wrapped and my boots zip tied on one rig. On other Soobs, I have stainless steel safety wire.... it won't rust. Zip ties going strong for 2 years now. Link to comment Share on other sites More sharing options...
idosubaru Posted August 13, 2014 Share Posted August 13, 2014 others have said don't buy "cheap chinese" zipties for this use. i'm not sure if it matters or if you can even buy non-chinese plastic stuff any more though. LOL Link to comment Share on other sites More sharing options...
two85s Posted August 13, 2014 Share Posted August 13, 2014 lol.....I ordered the boots (4 DOJ), and 2 each (2 large-2 small) of the metal "clamps" from Subaru dealer. I will reuse the roll pins. I have a snap ring pliers already. I was thinking about the zipties "baking", aging, getting hit bye a sharp rock, etc and decided to use the Subaru steel clamps. So I have never taken rear axles out of rear wheels. Any special trick? I have FSM for 1985 so I will be reading them too. I have to get the new grease still and a clamp tool (cable tie gun?) like has been talked about in the thread for the clamps. Thanks for the input guys! Aaron Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now