TheLoyale Posted April 16, 2014 Share Posted April 16, 2014 (edited) So I'm gonna swap out the Power seat belts in the Loyale with manual ones, I've noticed the upper B-pillar plastic is different where it the lower B-pillar cover and meets the head liner, so I will need to swap that out as well. I want to see what else is different. I know I will also need the swap out the A-Pillar cover (The one that runs down the side of the Windshield) Just some good pictures of everything in that general area would be cool with me. Thanks, -Tom Edited April 16, 2014 by TheLoyale Link to comment Share on other sites More sharing options...
SmashedGlass Posted April 16, 2014 Share Posted April 16, 2014 I'll get some shots of the plastic pieces later, Tom. As far as the upper B-pillar, I think the only difference is that there is a hole in it for where the upper belt anchor bolt passes through. Link to comment Share on other sites More sharing options...
TheWanderer Posted April 16, 2014 Share Posted April 16, 2014 Pardon my threadjack Tom, but this brings up my question that I posed to you in PM as well Does anyone know if its possible to swap early EJ belts into a 3rd gen EA? I want to switch the interior over to black or grey, and since I am picking up the EJ belt receivers from Tom here, I'm wondering what the differences are between my factory belts and the EJ belts (mainly if I can swap the entire setup, retractors and all in or if I will have to swap the EJ belts into my EA retractors). My 3rd gen has manual belts from factory and I plan to keep them that way. Is it possible? Link to comment Share on other sites More sharing options...
TallonX Posted April 16, 2014 Share Posted April 16, 2014 This work? 1 Link to comment Share on other sites More sharing options...
TheLoyale Posted April 17, 2014 Author Share Posted April 17, 2014 No worries on the threadjack man, if we can kill two birds with one stone, go for it! Yes, that picture works perfectly! Now I see how the A-pillar is a single piece with the trim that runs above the door(s) The Power belt setup is a little different, my B-pillar cover goes over the top trim piece instead of mating up to it. Heres a pic. Manual Vs. Power Link to comment Share on other sites More sharing options...
suprjohn Posted April 18, 2014 Share Posted April 18, 2014 I have all the plastic interior pieces out of my '89 DL wagon right now if you need any pics... John 1 Link to comment Share on other sites More sharing options...
TheLoyale Posted April 19, 2014 Author Share Posted April 19, 2014 I think Tallon's photo shows pretty much all I needed to see (any more!) John, you are more than welcome to post some photos if you have them, incase this thread may help someone else. -Tom Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now