MR_Loyale Posted May 16, 2014 Share Posted May 16, 2014 I am going to have to send my heads (EA82) out to be done. Can I please get any recommendations of shops people have used in the Seattle/Bremerton/Tacoma area? Good or bad I am interested. Thanks Link to comment Share on other sites More sharing options...
Caboobaroo Posted May 16, 2014 Share Posted May 16, 2014 Check out C&D machining in Kirkland. They do all the machine work for the Dirtfish rally cars and have done great work for me in the past. They might not be cheap though.... Link to comment Share on other sites More sharing options...
El Presidente Posted May 24, 2014 Share Posted May 24, 2014 Last heads I had done professionally, was Earls machine shop down in Des Moines. They did a great job and it only cost $100 to take .020" off a set of EA81 heads. Action Auto in shoreline is always a good place to go, but they're pricey. Have you considered just doing it yourself? I just did two EA82 HG jobs and resurfaced them myself. It works so good, I'll never go to a machinist to surface heads again unless I'm taking a specific amount off. Josh Link to comment Share on other sites More sharing options...
skishop69 Posted May 24, 2014 Share Posted May 24, 2014 Heads Up in Auburn. They have done tons (literally, lol) of EA82 heads. All they do is aluminum heads and I've been taking all my shop work to them for 15 years. Warped heads, cracked heads, or just a rebuild, they can fix them. 1 Link to comment Share on other sites More sharing options...
Mykeys Toy Posted May 25, 2014 Share Posted May 25, 2014 Good to know.. I may have to take a set to them soon. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now