d8usti5n Posted May 19, 2014 Share Posted May 19, 2014 I recently saved a set of jump seats and I am trying to figure out the best way to reinstall them into my brat, so that they can be easily removed and put back in as needed, instead of welding them into place. So I guess my question is, whats everyones expereince with installing these without welding them into place? Pictures would be great, as im trying to figure out how i want to install mine. Thanks! Link to comment Share on other sites More sharing options...
lvsarge Posted May 19, 2014 Share Posted May 19, 2014 I haven't gotten so far with my restoration to put the seats in yet, but I would fab a bracket to bolt the seat carrier through the bed. That way you just need a socket to remove everything. Weld a bolt/stud to the underside, to make it easy for installation/removal. But i'd also be worried about exposure to the elements and bolts rusting up. Link to comment Share on other sites More sharing options...
spicypeanut Posted May 19, 2014 Share Posted May 19, 2014 I recently saved a set of jump seats and I am trying to figure out the best way to reinstall them into my brat, so that they can be easily removed and put back in as needed, instead of welding them into place. So I guess my question is, whats everyones expereince with installing these without welding them into place? Pictures would be great, as im trying to figure out how i want to install mine. Thanks! I just did this very thing. 6 Grade 8 Bolts through the bed and they jump seats can be removed fairly easily. Even had my engineer friend verify it would be structurally safe. 1 Link to comment Share on other sites More sharing options...
d8usti5n Posted May 19, 2014 Author Share Posted May 19, 2014 I just did this very thing. 6 Grade 8 Bolts through the bed and they jump seats can be removed fairly easily. Even had my engineer friend verify it would be structurally safe. Did you go througg the mounting bar or use brackets? Link to comment Share on other sites More sharing options...
spicypeanut Posted May 19, 2014 Share Posted May 19, 2014 Did you go througg the mounting bar or use brackets? I went directly through the lower mounting bar. Once I had 3 of the bolts tightened down I felt the bracket and it was already rock solid. The extra 3 I ran and the seats aren't going anywhere. 1 Link to comment Share on other sites More sharing options...
bendecker Posted May 19, 2014 Share Posted May 19, 2014 (edited) I went a different route and had a pro welder put in some angle bracket and bolted them on that way with 4 bolts and backing plates: https://plus.google.com/photos/104996736048797020042/albums/5420708382421326497?banner=pwa Edited May 19, 2014 by bendecker 2 Link to comment Share on other sites More sharing options...
d8usti5n Posted May 20, 2014 Author Share Posted May 20, 2014 I went a different route and had a pro welder put in some angle bracket and bolted them on that way with 4 bolts and backing plates: https://plus.google.com/photos/104996736048797020042/albums/5420708382421326497?banner=pwa i dig it Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now