BoostedBoxer421 Posted May 20, 2014 Share Posted May 20, 2014 so recently ive been driving my turbo wagon daily, and now whenever i put gas into it or go up a steep hill and the gas gauge moves it dies when it dies i know its something electrical because i cant pop start it and the tach wont move when starter is running, but it'll start after a few minutes and i know when its about to start because the tach starts to jump when trying to start it ive never heard of anything like this before, so i was hoping someone may have had the same problem before and might know what to do. has been really frustrating lately Link to comment Share on other sites More sharing options...
Cougar Posted May 20, 2014 Share Posted May 20, 2014 The first place I suggest you for the trouble is the fusible links located in the plastic box mounted on the coolant reservoir. Check for loose connections. Some folks have found bad connections on the bottom side of the panel also. If that area is okay then the ignition switch may be the next best suspect. Check to see if the dash fuses are getting power when the trouble happens. If they aren't then the trouble is between the fusible links and the ignition switch wiring. The fuel pump may be getting weak since going up hills is a problem. If that problem still happens after you fix the connection problem I suggest you replace the pump. Link to comment Share on other sites More sharing options...
BoostedBoxer421 Posted May 21, 2014 Author Share Posted May 21, 2014 Fuel pump is brand new, so I'll have to check power at fuses when it does die And its not the going up hill part, it does if I go down hill and stop too, or even if I accelerate really hard and when the gas gauge moves it dies I can pretty much count on it dying every time I get gas now, like it'll fire up for a second and die at the gas pump Link to comment Share on other sites More sharing options...
jono Posted May 21, 2014 Share Posted May 21, 2014 if you are led to believe it is as a result of the depth gauge moving - disconnect gauge sender wire at tank sender, see if things change ? 1 Link to comment Share on other sites More sharing options...
BoostedBoxer421 Posted May 21, 2014 Author Share Posted May 21, 2014 ok, ill see how that works soon as i can get to it. and im thinkin that because its as soon as i get gas every time now, right when the gas gauge moves about 1/8 inch it just cuts power. not all power, just ignition, everything else still works fine. the tach doesnt move when it happens, i just keep turnin the key and as soon as i see the tach jump a lil bit i just hold the key on and it fires right up Link to comment Share on other sites More sharing options...
Dee2 Posted May 21, 2014 Share Posted May 21, 2014 (edited) When it dies is it sudden ? If so, then indeed it is likely electrical related. If it dies slowly, doing a hurt dance, then it is likely a fuel related problem. Checking the sending unit connection is a great idea of where to start looking. Edited May 21, 2014 by Dee2 Link to comment Share on other sites More sharing options...
robm Posted May 21, 2014 Share Posted May 21, 2014 Have the engine running when you disconnect the fuel sender. Can't hurt, and if it stops when you play with it, then you know it is somehow (weirdly) related. Link to comment Share on other sites More sharing options...
BoostedBoxer421 Posted May 21, 2014 Author Share Posted May 21, 2014 yeah its just an instant power cut when it does it. im gonna try disconnecting the sending unit while running next Link to comment Share on other sites More sharing options...
BoostedBoxer421 Posted May 29, 2014 Author Share Posted May 29, 2014 So... I have no idea why it would die every time I got gas, but my problem was from my crank angle sensor failing Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now