drake13 Posted May 22, 2014 Share Posted May 22, 2014 So I started on pulling apart my ea82 to replace the gaskets and seals for the oil pump and it got to dark out to continue. I have the pump off and wondering if I pull off the pully or the pump end? Link to comment Share on other sites More sharing options...
LucasP Posted May 22, 2014 Share Posted May 22, 2014 You don't have to pull the pulley to pull the pump. The pump should wiggle out with the pulley on it. It took me forever to figure it out the first time since I thought the pulley had to come off first. Link to comment Share on other sites More sharing options...
drake13 Posted May 22, 2014 Author Share Posted May 22, 2014 (edited) This is where I'm at its off but need to know what side to pull for the shaft seal. Well I guess I can't upload my picture but it's sitting in a box in the kitchen Edited May 22, 2014 by drake13 Link to comment Share on other sites More sharing options...
Subruise Posted May 22, 2014 Share Posted May 22, 2014 soft vise the impeller then remove pulley bolt and pulley. shaft then comes out. hth Link to comment Share on other sites More sharing options...
drake13 Posted May 22, 2014 Author Share Posted May 22, 2014 Thanks for the help subruise I have the new seal in and gasket on. About to get the rotten bastard back together. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now