hankosolder2 Posted May 28, 2014 Share Posted May 28, 2014 I've got a '98 Legacy 4EAT I'm trying to get through emissions. If I jack this car up so all 4 wheels are off the ground and put the FWD fuse in, is it possible to do a "drive cycle" and set the readiness monitors without actually driving it on the road? Nathan Link to comment Share on other sites More sharing options...
Fairtax4me Posted May 28, 2014 Share Posted May 28, 2014 Should be able to, but you need to run it at about 45-50 mph for 5-10 minutes to get the CAT monitor to set. Need between 1/2 and 3/4 tank of fuel to get the evap monitor to set. Subaru has a TSB out about the quickest way to set the monitors. I've posted it a few times. If you search here for How to set Emission Monitors you should find it. Link to comment Share on other sites More sharing options...
hankosolder2 Posted May 29, 2014 Author Share Posted May 29, 2014 Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now