95legwagon Posted June 13, 2014 Share Posted June 13, 2014 can i run ej251 (01 forester) heads on my phase 1 ej22e IF i run the 251 intake manifold and engine managment? would cr drop? would the piston kiss the valves? im turboing my 95 legacy ej22 and im stuck on this after searching all over google to no avail. Link to comment Share on other sites More sharing options...
Fairtax4me Posted June 13, 2014 Share Posted June 13, 2014 It can be done, and yes it will lower compression due to the larger combustion chamber in the phase 2 heads. I've seen it suggested that compression ratio would be between 8.5 and 9.0:1 with that setup, depending on which block you have and how thick of a head gasket you use. Compare that to 9.5:1 compression of the stock setup for that block. The wiring will be tricky. You'll probably want to get the intake manifold, wiring, and ECU for a 99 Legacy EJ22 to keep things as simple as possible for matching up wires in the harness. You could also run an aftermarket engine management system like megasquirt which will make the wiring easier, and provide more tuning ability for a turbo setup. Link to comment Share on other sites More sharing options...
86BRATMAN Posted June 13, 2014 Share Posted June 13, 2014 Just how adventurous/skilled are you? Because there is always the wrx ecu swap http://www.rs25.com/forums/f105/t199059-diy-wrx-ecu-swap.html Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now