Kris79 Posted June 24, 2014 Share Posted June 24, 2014 (edited) Hello everybody. So I replace left rear wheel bearing. Reassembled everything and forgot to mark a few things to line them up properly. Included a pic of the wheel and any help greatly appreciated. I tried to post picture of rear left wheel. File is too large and I cannot reduce it with this computer. It's tilt further into the wheel well at the top. So it's flopped over fairly far. Edited June 24, 2014 by Kris79 Link to comment Share on other sites More sharing options...
l75eya Posted June 24, 2014 Share Posted June 24, 2014 Think you gotta upload JPEG format pics. Link to comment Share on other sites More sharing options...
john in KY Posted June 24, 2014 Share Posted June 24, 2014 Does the car have a rust problem? Rear wheels will tilted inward when part of the suspension fails because of rust. Link to comment Share on other sites More sharing options...
987687 Posted June 24, 2014 Share Posted June 24, 2014 Here is the page from the FSM detailing how to align the rear wheels. There's actually a surprising amount of camber and toe adjustment possible. 3 Link to comment Share on other sites More sharing options...
Kris79 Posted June 25, 2014 Author Share Posted June 25, 2014 I'll try this.The car is not rust free. I have never seen a rust free Loyale around here ever. I replaced the wheel bearing and now the rear left wheel looks really tilted. Tomorrow I'm going to put it on a jack stand and have a good look underneath to make sure it isn't a rust issue. It didn't look too bad when I took the arm out to get the bearing replaced. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now