barrett045 Posted July 10, 2014 Share Posted July 10, 2014 Im looking for a new throttle cable that will work with the linkage adaptor that comes with the webber carb kit... I cant seem to find one but im not really sure what to be looking for. Thanks! Link to comment Share on other sites More sharing options...
Leeroy Posted July 10, 2014 Share Posted July 10, 2014 Much easier to use the original cable and Subaru/Hitachi lever mounted on the Weber than mucking around with the generic bits supplied in the kits. Link to comment Share on other sites More sharing options...
barrett045 Posted July 10, 2014 Author Share Posted July 10, 2014 The issue is the factory mount is two low and the throttle gets stuck open... So i got the bracket that makes it level with the linkage on the carb but i need a throttle cable that can mount into it. Shouldn't be too hard since thats actually what its for. I just cant seem to find one Link to comment Share on other sites More sharing options...
djcommie Posted July 11, 2014 Share Posted July 11, 2014 ATP Y631 fits the Gen 1 normal clamp style cable holder. It has a bare end, so you may need a cable clamp for the carb side end. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now