Hondasucks Posted May 11, 2004 Share Posted May 11, 2004 So I'm on my way to my girlfriends house today in the 85 wagon, basically giving it a road test before I trade it off for the XT. Fuel light comes on on my way over so I figure I'll stop at the Arco station and get some fuel before I go to her house since the bung munch at the Chevron wasn't interested in serving me. Anyhoo as I am rolling up to the gas station it sputters and dies, I Think nothing of it, figuring it was out of gas, since it's fuel light doesn't last as long as the one in the turbowagon. Get my gas, fires right up, drive out to the exit and it dies. Won't restart. Helpful cop helps me push it back into the gas statioin lot so I'm not blocking traffic. Pop the hood, take the air cleaner off and try starting it. Fuel starts pouring out of the carburetor. Great... So I pop the top off and take the float valve out, and wash it off in the bowl, stick it back in, shook the float to make sure it wasn't full of fuel (it wasn't).. Notice bowl is full of gunk.. So now I get to rebuild the carb like I should have when I had it off before... Oh well live and learn.. No I'm not gonna weberize it cuz I dont' have a spare Weber... Anything in particular I should pay attention to when I'm rebuilding the carb? Link to comment Share on other sites More sharing options...
GeneralDisorder Posted May 11, 2004 Share Posted May 11, 2004 Most important thing is to remove the jets (under the float bowl), and make sure there is nothing in the float bowl itself to mess up the spray pattern of the jets. As you have noticed, gunk likes to sit right in that spot. I'm really at a loss as to why Hitachi didn't put a screen of some sort down there to catch at least the big stuff. GD Link to comment Share on other sites More sharing options...
Hondasucks Posted May 11, 2004 Author Share Posted May 11, 2004 Well, I have a feeling that the fuel filter in this car has been neglected... And, at least in the EA81 carb I took apart, there was a screen in the supply line behind the nipple the fuel hose attaches to.. I had to take that out and soak it in chem-dip to get the gunk out of it. Trust me, this carb is getting soaked in chem-dip for like, a week lol, it;s gonna look liek brand new :-) And this thing BETTER run like a champ when I get done with it! (And get better than 18MPG..) Link to comment Share on other sites More sharing options...
Turbone Posted May 11, 2004 Share Posted May 11, 2004 If you dont have alot of gas in the tank, it might be a good idea to pull the drain plug and get rid of some of the gunk in the tank. Link to comment Share on other sites More sharing options...
archemitis Posted May 12, 2004 Share Posted May 12, 2004 just for the record, hitachis kick rump roast! 100k is a great run for a carb, and most make it well past that, with little to no service. Link to comment Share on other sites More sharing options...
Aldoat Posted May 12, 2004 Share Posted May 12, 2004 I have to agree with Archemitis. My 86 Brat has 174K on it with the original carb. Have never had a problem with the carb. That is one of the reasons I have hesitated putting on a Weber. Hope I didn't just jinx it. Link to comment Share on other sites More sharing options...
Hondasucks Posted May 13, 2004 Author Share Posted May 13, 2004 yeah I can always drain the tank and put the gas in the lawnmower lol.. I've already run it outta gas once cuz it gets worse mileage than I had expected (18 vs 30) so that prolly didn't help! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now