spicypeanut Posted July 28, 2014 Share Posted July 28, 2014 (edited) So I know when I use my high beams, the fuse block gets very hot. So hot in fact that it looks like at one point in time there may have been some melting involved. I pulled it aparat to get a closer look and this is what I found. Untitled by blue03wrx, on Flickr Untitled by blue03wrx, on Flickr I bought brand new, correct fuses. I wire brushed the actual contacts on the fuse block, and tightened up the fingers that hold the actual fuses in place. Now that all of that has been cleaned up, I need to track down another connector to try to replace the partially melted one I've got. I already checked RockAuto and I can't seem to find anything. Does anyone have any locations that might have the connector I can buy? Edited July 28, 2014 by spicypeanut Link to comment Share on other sites More sharing options...
Scott in Bellingham Posted July 28, 2014 Share Posted July 28, 2014 if its from a gen1 Legacy EJ22 HARNESS I MOST LIKELY HAVE ONE Link to comment Share on other sites More sharing options...
moosens Posted July 28, 2014 Share Posted July 28, 2014 I'm pretty sure he means Gen I as in 1972-79 cars. Link to comment Share on other sites More sharing options...
spicypeanut Posted July 28, 2014 Author Share Posted July 28, 2014 if its from a gen1 Legacy EJ22 HARNESS I MOST LIKELY HAVE ONE Its from a 1978 Brat. Not sure what the Legacy EJ22 used, could you post a picture? If it might fit I'll take it. I'm pretty sure he means Gen I as in 1972-79 cars. I would be suprised if Subaru didn't use the same connectors across multiple models for years. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now