ferox Posted July 30, 2014 Share Posted July 30, 2014 So I have a few of these hubs laying around that are identical to ones that I just sold with a rear disc setup, but I was wondering if they are also front hubs. I had some others that had did not protrude inboard as much as these, so I want to determine if these are rear disc specific. Link to comment Share on other sites More sharing options...
TheLoyale Posted July 30, 2014 Share Posted July 30, 2014 I think these are indigenous to the rear disc setup only. Looks like the spindle is about 1/4" longer than the fronts. I don't think the EA81s would be much different than the EA82s. Link to comment Share on other sites More sharing options...
Gloyale Posted July 30, 2014 Share Posted July 30, 2014 Front hubs have a much larger spine set than the EA82 rears. EA81 and EA82 hubs share spline count, and can be somewhat interchagned.....I say somewhat because the EA81 are a bit deeper.....so cotter pin location becomes an issue for final fitment.......but they will somewhat "work". Rears are smaller and those look like rears to me. 1 Link to comment Share on other sites More sharing options...
ferox Posted July 30, 2014 Author Share Posted July 30, 2014 Thanks guys. That's the verification I needed. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now