farmer Posted August 3, 2014 Share Posted August 3, 2014 (edited) This post is more for information than anything else. I'll add it to my "Erratic Issues" post (Erratic issues) of some time ago, which is gaining a lot of text as time goes along - still a great car and love it. I was having a sound from under the car that sounded very much like a gear slap. I thought it must be coming from something in the torque convertor/tranny area and would watch it. The last couple of days it got progressively louder, so I got out my DIY stethescope to get it pinned down. I traced it to the front of the engine, which not only surprised me, but got me a little concerned about engine problems that I really didn't need. What had happened was my relatively new Gates water pump with about 25K on it was on the way out and the timing belt was tracking off center, striking the front cover. I guess I'm spoiled with 200K water pump change intervals, but the pump that was replaced with the timing belt was done. Edited August 3, 2014 by farmer Link to comment Share on other sites More sharing options...
Gloyale Posted August 3, 2014 Share Posted August 3, 2014 Atsugi/Paraut pumps only. GMB sucks. Link to comment Share on other sites More sharing options...
idosubaru Posted August 3, 2014 Share Posted August 3, 2014 GMB sucks. on EJ engines Gloyale? you've seen issues? i haven't seen that yet, thanks. Link to comment Share on other sites More sharing options...
zombieforce Posted August 3, 2014 Share Posted August 3, 2014 I have put tons of gmb pumps on ej engines and not had any issues. Only t belt issues I have had was a dayco roller kit tensioner bolt broke clean off in the block and took out the valves on both heads. Link to comment Share on other sites More sharing options...
farmer Posted August 3, 2014 Author Share Posted August 3, 2014 (edited) IF it was just the water pump and watch the temp gauge, I wouldn't get too excited, but with the interference engines it makes me nervous. I did put a Direct Imports water pump back in it. About half again as much, but It was the only alternative at four local parts stores. When I saw the belt sitting cocked on roller, I knew I got lucky this time. Edited August 3, 2014 by farmer Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now