wakingtowinter Posted August 12, 2014 Share Posted August 12, 2014 I've searched and can't find a clear answer on this. I want to do a rear disc conversion on my 95 L wagon and one guide I read says that anything up to 2001 will work, whereas I've seen other people using WRX brakes in the back. There's a guy selling everything I need off a 2002 WRX, including the parking brake cables, which is one of my questions. First, will these knuckles bolt up on my car? Second, will the parking brake cables be of appropriate length? Link to comment Share on other sites More sharing options...
idosubaru Posted August 12, 2014 Share Posted August 12, 2014 you need larger wheels to clear the larger front calipers. you should be able to just bolt the brackets, rotor, caliper onto your 1995 knuckle and be done. if you swap hubs you may have differing ABS set ups. 1995 ABS tone ring is on the knuckle/housing. 2000+ legacy/outback...i'm unsure when impreza switches - but those tone rings are on the axle. that doesn't rule out swapping as you can install "tone ring" axles in "non-tone ring" older subarus, i used to do it all the time, by knocking the outer tone ring off...but gotta know what you're working with. the 1995 abs sensor may not bolt into the 2002 knuckle/hub. if you don't have ABS - then it doesn't matter. should be an easy swap - swap it all. i'm unsure about parking brake cables. i would think you simple use your existing parking brake cables and attach them to the rear WRX stuff if they didn't change the suspension by then (again legacy/outack is changed by 2000, but i don't think rear impreza does by that time?) Link to comment Share on other sites More sharing options...
86BRATMAN Posted August 12, 2014 Share Posted August 12, 2014 (edited) You'll need at least 16" wheels to clear the calipers, or some strategic work with a grinder on the calipers to clear 15s. You'll want to grab the park brake cables from him, they will swap out fine with your existing cables. Just be sure to route then correctly. Edited August 12, 2014 by 86BRATMAN Link to comment Share on other sites More sharing options...
Numbchux Posted August 12, 2014 Share Posted August 12, 2014 I'm reading this as rear brakes only....right?? In which case. yes. WRX through 2005 have the exact same rear brakes as any GC (-'01 impreza) Link to comment Share on other sites More sharing options...
wakingtowinter Posted August 13, 2014 Author Share Posted August 13, 2014 OK great, thanks guys. My car already has stock WRX wheels so I'm good there. and yeah, I'm talking about rear brakes only. Link to comment Share on other sites More sharing options...
86BRATMAN Posted August 13, 2014 Share Posted August 13, 2014 I must have skimmed over the part about only rears, disregard my clearance statement. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now