jono Posted August 13, 2014 Share Posted August 13, 2014 (edited) there is a few of them... only in use in the 3 plug ECU flapper afm, 2 wire knock sensor Series One 85,86MY different mounting brackets for starters - between the XT and the sedans and wagons. XT is mounted above the transmission tunnel behind the ash tray with fuel and ignition relays Sedan is mounted beside the glove compartment against the a pillar base The US RX version is different from the Australian market auto version of the GLTA EA82T 3 speed 4WD auto. Not sure yet if the RX and the GLTA AUDM got same or different yet. The plastic pin plugs have a number printed in black on them to correspond the KCM number just a 23 or a 25 in black The mounting brackets also have that same number stamped into them. KCM23C AUDM GLTA sedan 3 speed auto4WD KCM24 USDM guessing 5PT 4WD RX KCM25 AUDM Vortex XT turbo 5 speed FWD - yellow label I think the US item is different having an altitude wire.Or ours different for not having it Does anyone know much about these? Ivansimports maybe ? There is very little in the factory manuals. Parts books may help. Must go look in there Edited August 13, 2014 by jono Link to comment Share on other sites More sharing options...
jono Posted August 13, 2014 Author Share Posted August 13, 2014 then, there is this one, by Denso no claim to be a knock control module at all, is in black plastic box, one extra pin and sold to me over the internet. I was expecting same metal box and part number I had before. Silly me did not ask I suppose I suspect it may be NZ DM or maybe that part number looks more EA81 stuff. Maybe it is EA81T ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now