vulture Posted August 19, 2014 Share Posted August 19, 2014 I am working on replacing the duty C solenoid in my 1998 OBW. I have everything removed except for the darn tail housing on the transmission. All 11 bolts are out but the thing won't budge. Am I missing a trick? In this photo (taken prior to bolt removal), see that thing circled in red on the lower left? Is that an alignment pin, or a bolt threaded in from the other side? Thanks. Link to comment Share on other sites More sharing options...
CNY_Dave Posted August 19, 2014 Share Posted August 19, 2014 Pin. There are two of them. Thay make getting the thing off a pain, they fit quite snugly. Link to comment Share on other sites More sharing options...
vulture Posted August 19, 2014 Author Share Posted August 19, 2014 Gotcha, I saw the other one and lubed both with PB Blaster. Was finally able to work the housing off. Not easy! Thanks. Link to comment Share on other sites More sharing options...
CNY_Dave Posted August 20, 2014 Share Posted August 20, 2014 I had a bolt snap off when I took mine off, fortunately it was in an easy spot to drill and helicoil. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now