alia176 Posted May 13, 2004 Share Posted May 13, 2004 Hey guys, I'd like to swap the #1 and #3 injectors with the #2 and #4 in the hopes of tracking down my #1 and #3 cyl misfire code. Are the O rings generic type of O rings or are they something special? I'm sure to rip one or two so I figured I'd call the local stealership to see if they have any. They quoted me $13/each Wow! I'll soak the injector tips in FI cleaner or something. Ali '95 Legacy Link to comment Share on other sites More sharing options...
Legacy777 Posted May 13, 2004 Share Posted May 13, 2004 The injectors...at least on the ones I've worked on, aren't exactly the easiest to get out, however you should be able to get them out without damaging the o-rings. From my experience, generic ones don't seem to fit as well. Link to comment Share on other sites More sharing options...
Storm Posted May 13, 2004 Share Posted May 13, 2004 I'd be looking at the coil ends of the plug wires. They are known to get corroded. Link to comment Share on other sites More sharing options...
legacy2.5 Posted May 14, 2004 Share Posted May 14, 2004 i agree with storm, had that code before, it was the #3 coil wire Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now