Kraig Posted September 25, 2014 Share Posted September 25, 2014 I was at the wrecker today getting a fuel pump, and the loyale there had an EA82T ... Mines a standard EA82. Say I wanted to put the turbo on there, because I would love a little more pop. Is it really as easy as it looks? or is there more to it that I am missing? Link to comment Share on other sites More sharing options...
idosubaru Posted September 25, 2014 Share Posted September 25, 2014 the turbo exhaust won't clear your non-turbo cross member. you need to install the turbo cross member, custom fabricate your cross member for exhaust clearance, or custom exhaust work. based on the piston design turbo engines are low compression and non turbo engines are high compression. technically you can install just the turbo if you keep the boost really low - like 3-7psi. without excellent engine management and care you run the risk of blowing your engine up, which is what most people do. you could swap the entire engine - block, turbo, and all. the electronics won't be the same either and require some tweaking. for the amount of work you'd be better off doing an EJ swap - hardly any more money or work and 10X the reliability, practicality, maintenance..etc. Link to comment Share on other sites More sharing options...
Prwa101 Posted September 25, 2014 Share Posted September 25, 2014 It's not worth the swap. Easy and more productive to swap a ej22. The ea82t heads tend to crack and are becoming harder to find. And if you want boost find a ej22t that'd be fun! Prwa Link to comment Share on other sites More sharing options...
Kraig Posted September 25, 2014 Author Share Posted September 25, 2014 Great thanks for the help!. ... Finding an EJ22 is like finding diamonds out here however though, will just have to keep my eyes open. Link to comment Share on other sites More sharing options...
idosubaru Posted September 25, 2014 Share Posted September 25, 2014 how about an EJ18? granted it's the PNW you're talking about but they have zero demand so prices should be reasonable sometimes. use EJ22 wiring by bolting EJ22 intake manifold on top of an EJ18 and it'll be plug and play to drop in an EJ22 when you find it. Link to comment Share on other sites More sharing options...
Vegablade Posted September 25, 2014 Share Posted September 25, 2014 Great thanks for the help!. ... Finding an EJ22 is like finding diamonds out here however though, will just have to keep my eyes open. Are you in Lynden, Washington State? We probably have the highest population of Subarus here in the PNW. There are 16 Legacys at the Arlington Pick N Pull right now. Link to comment Share on other sites More sharing options...
Kraig Posted September 25, 2014 Author Share Posted September 25, 2014 im actually just across the border in canada. I couldn't find my area on here and lynden was closest. At our pick n pull there is next to nothing, and the second any soobies come in they get raped instantly. Link to comment Share on other sites More sharing options...
Vegablade Posted September 26, 2014 Share Posted September 26, 2014 im actually just across the border in canada. I couldn't find my area on here and lynden was closest. At our pick n pull there is next to nothing, and the second any soobies come in they get raped instantly. That sucks, what are the rules on bringing parts across the border? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now