FERNANDO42 Posted September 26, 2014 Share Posted September 26, 2014 93 SUBARU IMPREZA BACKFIRES AND DOESN'T START AFTER CHANGING TIMING BELT AND WATER PUMP. PLEASE HELP Link to comment Share on other sites More sharing options...
AdventureSubaru Posted September 26, 2014 Share Posted September 26, 2014 (edited) Revisit your timing marks. Luckily, the 93 motor is non interference. Get all the timing marks lined up right, make sure your tensioner is working properly. Test it first by rotating the cam until all the marks line up again. If they eventually realign, you should be good to go. Edited September 26, 2014 by AdventureSubaru 1 Link to comment Share on other sites More sharing options...
AdventureSubaru Posted September 26, 2014 Share Posted September 26, 2014 A common mistake is to line up the crank sprocket arrow on the front of the sprocket instead of the timing mark line on the back of it. Be sure it's the line and not the arrow. Link to comment Share on other sites More sharing options...
johnceggleston Posted September 26, 2014 Share Posted September 26, 2014 (edited) the timing is off. check out this link: > Timing Belt Pictures < Edited September 26, 2014 by johnceggleston Link to comment Share on other sites More sharing options...
MilesFox Posted September 27, 2014 Share Posted September 27, 2014 Never use the arrows. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now