Jump to content
Ultimate Subaru Message Board

creaking, squeaking, and other noises from front end.


Recommended Posts

Well boys and girls, my 82 brat has quite some noise coming from the front end. I've tried watching some YouTube videos to find a similar sound but just can't find one. At any speed on a straight away, it Mike's a slight repetitive squeaking noise that increase with speed. While turning right especially hard rights it makes a very loud creaking/grinding noise like something is rubbing on the wheel. A very metallic sound. You can also feel the car kind of shake and shimmy...it reminds me of trying to turn with a vehicle in 4wd on pavement. Lastly while braking there is a really bad grinding and popping noise. My initial thoughts have been axle or wheel bearings. I replaced the axle and that didn't do much. I'm planning on replacing the bearings tomorrow. I did notice while replacing the axle, it was very difficult to get the shaft through the bearings. I had to use a slide hammer. Someone commented that a dropped bearing would make it hard to get the shaft through. Anyways, any thoughts?

Link to comment
Share on other sites

Hmm, well the remanufactured axles are known to clunk right out of the box, so that may be a contributing factor if you used a remanned. Another way to check bearing health is simply by touching the outer hub after driving. My front right bearing is going, and if I touch my left front hub compared to my right front hub, the right is much hotter.

 

The other thought I've got on the subject is that if it is making the most noise on right turns, you would want to inspect the left c/v as the vehicle's weight shifts to the left while turning right. If it's a bearing, the same concept goes, would most likely be driver's side.

Link to comment
Share on other sites

Well, I replaced the wheel bearings, noise cleared up completely for a bit. Now I'm back with a squeaky wheel on the same side. But,, the squeak seems to subside when I hit the brakes or whenever the car is accelerating or under power. But as soon as I left off the gas or push the clutch in here here a repetitive squeaking over and over. I replaced the bearings with timken bearings by the way.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
 Share

×
×
  • Create New...