subarubrat Posted November 5, 2015 Author Share Posted November 5, 2015 Engine bay ready! 1 Link to comment Share on other sites More sharing options...
eatmorepossum Posted November 5, 2015 Share Posted November 5, 2015 Wow, this is really inspiring. Looking forward to seeing her put back together. Any tips on finding NOS badges? Cheers! Link to comment Share on other sites More sharing options...
subarubrat Posted November 5, 2015 Author Share Posted November 5, 2015 Rock auto, search under like cars such as the wagons that used the same badges. Link to comment Share on other sites More sharing options...
two85s Posted November 6, 2015 Share Posted November 6, 2015 Beautiful Brat and great work on it. Well done. Link to comment Share on other sites More sharing options...
subarubrat Posted November 7, 2015 Author Share Posted November 7, 2015 More progress today! KCs! Engine going in: Engine in! 3 Link to comment Share on other sites More sharing options...
subarubrat Posted November 9, 2015 Author Share Posted November 9, 2015 Installed the Ranchos today, way better shocks available today but sticking to the stock plus 10% upgrades that could have been done in the mid 80s. 2 Link to comment Share on other sites More sharing options...
Nico Posted November 12, 2015 Share Posted November 12, 2015 WOW wish i could have your brat !!! nice job Link to comment Share on other sites More sharing options...
MR_Loyale Posted November 13, 2015 Share Posted November 13, 2015 Your Brat is wonderful and that nice shiny engine is great too. It has been a while since I saw a clean engine bay like new. I don't wish to own it though. I would much rather someone like you own it and keep it in museum quality as you are doing. There is an older fellow with an original Brat in showroom condition only 28k original miles. He brings it out for WCSS every year. Preserving history is much more important to me than bragging rights. Thanks for stepping up to the challenge. 3 Link to comment Share on other sites More sharing options...
jdclick Posted November 13, 2015 Share Posted November 13, 2015 If any one was interested in the 14'' inch wheels he has on the posh vehicle, I have bad news for you. After almost an hour of googling an calling five different numbers, I'm sad to say that TaylorMade Wheels in South Gate, California is no longer in business. I found a number an old business number that happened to be the original owners home phone and the lady I talked to said they were no longer a business. So if you want bigger wheels under your EA81 or EA82 vehicle you're to have go with pugs (which are fairly hard to find in this day and age), drill your hubs for toyotas or drill toyota rims for subaru hubs. 1 Link to comment Share on other sites More sharing options...
subarubrat Posted November 14, 2015 Author Share Posted November 14, 2015 That blows, a year ago I looked them up and they had a website and it looked to be in business. The wheels after powder coating: And the seats refreshed and installed on the powdercoated frame: 2 Link to comment Share on other sites More sharing options...
ezapar Posted November 14, 2015 Share Posted November 14, 2015 The wheels look like the ones Jerry made a bunch of years ago. Cut out the spokes and welded them to a 14 inch hoop. He showed them off at WCSS6 I think. Pretty cool to find a set. Link to comment Share on other sites More sharing options...
subarubrat Posted November 14, 2015 Author Share Posted November 14, 2015 Check post #1 where I give the history of this set, a similar idea. Link to comment Share on other sites More sharing options...
subarubrat Posted November 15, 2015 Author Share Posted November 15, 2015 After routing and minimizing the underhood harness, I started working on the accessories. I have used POR 15 and I cannot suggest it enough. You need to use the whole system, clean and degrease, acid etch, POR 15, and chassis black over it and you get a lifetime finish. Tonight I did the casting for the alternator and AC compressor. 2 Link to comment Share on other sites More sharing options...
MR_Loyale Posted November 15, 2015 Share Posted November 15, 2015 (edited) They also make por in white. Edited November 15, 2015 by MR_Loyale Link to comment Share on other sites More sharing options...
subarubrat Posted November 16, 2015 Author Share Posted November 16, 2015 Wheels back on, still much work to do! 4 Link to comment Share on other sites More sharing options...
iluvdrt Posted November 16, 2015 Share Posted November 16, 2015 Man this is beautiful. I enjoy following it here just as much as FB. 1 Link to comment Share on other sites More sharing options...
subarubrat Posted November 22, 2015 Author Share Posted November 22, 2015 Hooking up the AC and brackets: 1 Link to comment Share on other sites More sharing options...
subarubrat Posted November 22, 2015 Author Share Posted November 22, 2015 One of the best tools for restoration like this is soda blasting, you can buy a nice one from Harbor Freight, they sell two and be sure to buy the bigger one, Here are before and after photos, one side blasted and one side not. You can blast painted or rusted surfaces down to bare metal and it won't harm rubber. 3 Link to comment Share on other sites More sharing options...
subarubrat Posted December 2, 2015 Author Share Posted December 2, 2015 Ran the motor the other day and it sounds strong! Brakes are bled and as soon as the throttle cable shows up its time to go for a drive! Still remaining is the whole interior...... Got some minor cleanup to do on the wiring harness, install the bed carpet, and continue to search for two NOS trim strips and seats. Link to comment Share on other sites More sharing options...
BulldogBlitz Posted December 17, 2015 Share Posted December 17, 2015 Such a beautiful brat! Man i'm jealous! Link to comment Share on other sites More sharing options...
subarubrat Posted December 18, 2015 Author Share Posted December 18, 2015 3rd eye up and working! 2 Link to comment Share on other sites More sharing options...
subarubrat Posted December 19, 2015 Author Share Posted December 19, 2015 Restored the interior and it is going back in this week. 2 Link to comment Share on other sites More sharing options...
Loyale 2.7 Turbo Posted December 19, 2015 Share Posted December 19, 2015 Your Brat is getting more Awesome! ... ... I really like the way you're doing things with it. Would you mind to share here with us, which method did you used to Restore the interior's Plastics? Kind Regards. Link to comment Share on other sites More sharing options...
iluvdrt Posted December 23, 2015 Share Posted December 23, 2015 I believe he used Duplicolor vinyl and plastic paint. It is what I have used in mine as well. Its pretty durable. Link to comment Share on other sites More sharing options...
iluvdrt Posted December 23, 2015 Share Posted December 23, 2015 That terminator in the back ground of that pic is awesome!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now