Silas Cruse Posted October 13, 2014 Share Posted October 13, 2014 looking for the write up on how to re-solder the wiper board thing to fix the intermediate function not working quite right. thanks Link to comment Share on other sites More sharing options...
somick Posted October 13, 2014 Share Posted October 13, 2014 Try to open that round thing that is attached to the wiper motor and clean contacts. Good luck, Sam Link to comment Share on other sites More sharing options...
Bantum Posted October 13, 2014 Share Posted October 13, 2014 (edited) Not aware of any 'how to' fix thread on here - but they shouldn't be that hard to pull apart & fix + there’s few things you can do to help : Firstly - What model is your car ? - As not all Subaru's came with intermittent wipers ... Secondly - Re-soldering the board should help as they do tend to 'dry out' over time, just check with a multi meter for correct ratings etc. + check for burnt out components as well ... Thirdly - You can clean-up & regrease the wiper mechanism / motor to make sure its running smoothly ... Cheers, Bantum ... Edited October 13, 2014 by Bantum Link to comment Share on other sites More sharing options...
turbosubarubrat Posted October 13, 2014 Share Posted October 13, 2014 There is a intermediate wiper relay so i would try replacing that first. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now