JuhaKankkunen Posted October 13, 2014 Share Posted October 13, 2014 Hi! Just want to know which are the best to buy them complete, not just the cv joint. Thanks guys!!! Link to comment Share on other sites More sharing options...
vinylscratchp0n3 Posted October 14, 2014 Share Posted October 14, 2014 Rockauto.com has them, under drivetrain > CV half shaft assembly. Link to comment Share on other sites More sharing options...
JuhaKankkunen Posted October 14, 2014 Author Share Posted October 14, 2014 Rockauto.com has them, under drivetrain > CV half shaft assembly. Thanks! Did you use them? What about their durablity? Thank you again!! Link to comment Share on other sites More sharing options...
BirdMobile Posted October 14, 2014 Share Posted October 14, 2014 Everything I've read seems to indicate that it's better to hold on to your OEM axles and remanufacture them. The aftermarkets don't seem to hold up. There's a thread "CV Longevity" on this forum that details it all. Link to comment Share on other sites More sharing options...
bratman2 Posted October 14, 2014 Share Posted October 14, 2014 I bought EMPI new axles a few years ago. Ever remanufactured axle I have bought lasted around a year or less. One returned at the counter before I even left the store. Had come apart inside the boot. Had another clicking when installed right out of the box. I don't remember the name but there is another company also making new axles for a reasonable price. I think EMPI is sold under a different name but you may still be able to find one or a pair if you google. Make sure your motor mounts and transmission mounts are good will help them last a lot longer. Link to comment Share on other sites More sharing options...
JuhaKankkunen Posted October 15, 2014 Author Share Posted October 15, 2014 Thanks all of you. I have cv joint wheel side NKN Japan, but the ones that goes gear box side are which I need. Engine and gearbox mounts are Brand new Subaru genuine. Link to comment Share on other sites More sharing options...
Dania02525 Posted October 15, 2014 Share Posted October 15, 2014 The EMPI one looks beefier? than the one I recieved from Oreilly. Better boot material too. It is apparently new as well and came with an axle nut unlike the one from Oreilly's. Link to comment Share on other sites More sharing options...
Idasho Posted October 16, 2014 Share Posted October 16, 2014 (edited) Empis are much beefier, and are 100% new. Nothing is reman. I woudnt use anything else. And dont. Only suggestion is to paint the axle shafts before installing. They are raw oiled steel. I made the mistake of not painting mine and they rusted up fast. Edited October 16, 2014 by Idasho Link to comment Share on other sites More sharing options...
Leeroy Posted October 16, 2014 Share Posted October 16, 2014 Thanks all of you. I have cv joint wheel side NKN Japan, but the ones that goes gear box side are which I need. Engine and gearbox mounts are Brand new Subaru genuine. If your CV joint is OK then you can just replace the DOJ at the gearbox end. Yes it is messy thanks to all the grease but with the right tools, new boots, bands and grease it only takes around 20 minutes to rebuild them (once they are out of the car of course!). NKN is original equipment for Subaru too. Link to comment Share on other sites More sharing options...
JuhaKankkunen Posted October 16, 2014 Author Share Posted October 16, 2014 Thanks all! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now